NHTSA vehicle safety data

2019 Kenworth T680 Recalls & Complaints

The 2019 Kenworth T680 has 9 NHTSA recall campaigns and 8 owner complaints on file as of November 3, 2026. Recall repairs are usually free at an authorized Kenworth dealer.

NHTSA recall and complaint data for the 2019 Kenworth T680. Recall data is refreshed daily from NHTSA.

2019 Kenworth T680 owner complaints

Owners have filed 8 complaints with NHTSA about the 2019 Kenworth T680, describing incidents dated May 18, 2018 to December 18, 2024.

Most-cited components

  • Service Brakes 3 complaints
  • Fuel/Propulsion System 2 complaints
  • Power Train 2 complaints
  • Structure 2 complaints
  • Unknown or Other 2 complaints
  • Electrical System 1 complaint

Of the 8 complaints on file, 2 report a fire; across all 8 complaints, owners report 1 injury (owner-reported, not verified by NHTSA).

Newest complaints

  • ODI #11639536 · Filed

    When I was driving on the highway the transmission fault error came on and my truck came to a stop on on the highway. It changed gears weirdly and kept the rpm’s high. Once it came to a stop I turned the truck off and on and it work fine. This has happened multiple times and a nationwide failure of…

  • ODI #11630873 · Filed

    The Eaton 12 speeds that these trucks come equipped with are failing just after the warranty expires. Lots of drivers with the same problem.

  • ODI #11544747 · Filed

    We have under hood fire during operating the truck. The driver was driving in TX. The police and fire department need to be involved to extinguish the fire. The truck need to be towed to terminal. The two dealers were doing estimate and the try to look up the causes of the fire, but is seems they…

Read all 8 complaints

NHTSA defect investigations

NHTSA's investigations file lists the 2019 Kenworth T680 in 1 investigation. A listed model year means only that an investigation names it; it says nothing about any particular vehicle. An open investigation is not a finding that a safety defect exists, and NHTSA can close one without a recall.

Open and recently closed NHTSA defect investigations

Insufficient Air Volume in Brake System /FMVSS 121

NHTSA #24V145000 · Service Brakes, Air — Supply — Reservoir/Tank · NHTSA notice

Reported February 23, 2024 · PACCAR Incorporated

Potentially affected: 936 vehicles

Repair completion: 24.04% (latest rate the manufacturer reported to NHTSA; dataset updated November 3, 2026)

Manufacturer campaign 24KWD · Owners notified August 12, 2024

Defect description

PACCAR Incorporated (PACCAR) is recalling certain 2009-2021 Kenworth C500, 2012-2021 Kenworth T440, 2009-2015 Kenworth T660, 2015-2024 Kenworth T680, 2009-2024 Kenworth T800, 2009-2020 Kenworth T370, 2014-2023 Kenworth T880, 2011-2016 Kenworth T470, 2023 Kenworth T480, and 2009-2019 Kenworth W900 vehicles. The air tanks have an insufficient volume of air for the brake system. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 121, "Air Brake Systems."

Safety consequence

Insufficient air volume can reduce braking performance and increase the risk of a crash.

Manufacturer remedy

Dealers will install the correct volume air tanks, free of charge. Owner notification letters were mailed August 12, 2024. Additional owner notification letters were mailed October 27, 2025. Owners may contact PACCAR customer service at 1-425-828-5888. PACCAR's number for this recall is 24KWD.

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.

Steering Fasteners May Fail

NHTSA #22V277000 · Steering — Critical Fasteners · NHTSA notice

Reported April 25, 2022 · PACCAR Incorporated

Potentially affected: 17,641 vehicles

Repair completion: 64.34% (latest rate the manufacturer reported to NHTSA; dataset updated November 3, 2026)

Manufacturer campaign 22 PBB and 22 KWB · Owners notified November 8, 2022

Defect description

PACCAR Incorporated (PACCAR) is recalling certain 2018-2020 Kenworth T270, T370, T440, T470, T660, T680, T880, T800, W900, W990; and 2018-2020 Peterbilt 330, 337, 348, 365, 367, 389, 520, 567, and 579 vehicles. The Dana D-Series axle steer arm fasteners that attach the steering arm to the steering knuckle may fail.

Safety consequence

Fastener failure can result in a loss of steering control, increasing the risk of a crash or injury.

Manufacturer remedy

Dealers will replace and torque the steer arm fasteners, at no charge. Owner notification letters were mailed November 8, 2022. Owners may contact Kenworth customer service at 1-425-828-5888 and Peterbilt customer service at 1-940-591-4220. PACCAR's numbers for this recall are 22 PBB and 22 KWB.

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.

Methane Detection System May Fail

NHTSA #21V00N000 · Electrical System — Wiring · NHTSA notice

Reported December 29, 2021 · PACCAR Incorporated

Potentially affected: 1,107 vehicles

Repair completion: 47.06% (latest rate the manufacturer reported to NHTSA; dataset updated November 3, 2026)

Manufacturer campaign 21KWH and 21PBN · Owners notified December 1, 2022

Defect description

PACCAR Incorporated (PACCAR) is recalling certain 2016-2022 Peterbilt 567, 579, 2021-2022 Peterbilt 536, 2017-2021 Kenworth T880, 2016-2022 Kenworth T680, 2018-2020 Kenworth T440, 2020 Kenworth T270, and 2021 Kenworth T280 vehicles. The methane detection system will not function if the system loses power.

Safety consequence

The operator may be unaware of a system malfunction or the presence of excessive methane levels, increasing the risk of injury or fire.

Manufacturer remedy

Dealers will re-wire the warning alarm, free of charge. Owner notification letters were mailed December 1, 2022. Owners may contact Peterbilt customer service at 1-940-591-4220, and Kenworth customer service at 1-425-828-5888. PACCAR's numbers for this recall are 21KWH and 21PBN.

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.

Incorrect Rear Brake ABS Modulator Valve/FMVSS 121

NHTSA #20V593000 · Service Brakes, Air — Antilock · NHTSA notice

Reported September 28, 2020 · PACCAR Incorporated

Potentially affected: 1,416 vehicles

Repair completion: 79.59% (latest rate the manufacturer reported to NHTSA; dataset updated November 3, 2026)

Manufacturer campaign 20KWD · Owners notified November 30, 2020

Defect description

PACCAR Incorporated (PACCAR) is recalling certain 2016-2021 Kenworth T680 trucks equipped with a 2.1m Cab and WABCO 6S/6M ABS brake system with drum brakes. The brake systems were manufactured with a standard rear-brake ABS modulator valve instead of a quick release valve, which may exceed the intended service-brake release timing. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 121, "Air Brake Systems."

Safety consequence

Longer than expected service-brake release timing may lengthen vehicle stopping distance, increasing the risk of a crash.

Manufacturer remedy

PACCAR will notify owners, and dealers will replace the standard rear-brake, ABS modulator valve with a quick release valve, free of charge. The recall began November 30, 2020. Owners may contact PACCAR customer service at 1-425-828-5888. PACCAR's number for this recall is 20KWD.

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

Driver not Warned when ABS Offline/FMVSS 121, 136

NHTSA #20V199000 · Electronic Stability Control (ESC) · NHTSA notice

Reported April 6, 2020 · PACCAR Incorporated

Potentially affected: 460,515 vehicles

Repair completion: 33.98% (latest rate the manufacturer reported to NHTSA; dataset updated November 3, 2026)

Manufacturer campaign 20pbc AND 20KWB · Owners notified May 26, 2020

Defect description

PACCAR Incorporated (PACCAR) is recalling certain 2008-2019 Peterbilt 330, 335, 337, 340, 348, 365, 367, 384, 386, 387, 388, 389, 567, 579 and 587 vehicles and 2008-2020 Kenworth T170, T270, T370, T660, T680, T800, T880, and W900 vehicles equipped with NAMUX Software. In the event that the Anti-lock Brake System (ABS) loses battery and/or ignition power to the controller, the dash warning light for the ABS may not illuminate to warn the driver of the loss of ABS. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 121, "Air Brake Systems," and 136, "Electronic Stability Control System on Heavy Vehicles."

Safety consequence

If the driver unknowingly operates the vehicle without the ABS functioning, there would be an increased risk of a crash.

Manufacturer remedy

PACCAR will notify owners, and dealers will update the NAMUX software within the cab control module, free of charge. PACCAR issued owners an interim notification on June 4, 2020. The recall began May 26, 2020. Owners may contact Kenworth customer service at 1-425-828-5888 or Peterbilt customer service at 1-940-591-4220. PACCAR's number for this recall is 20pbc AND 20KWB.

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

Cold Temperature may result in Parking Brake Delay

NHTSA #19V275000 · Parking Brake · NHTSA notice

Reported April 5, 2019 · PACCAR Incorporated

Potentially affected: 1,837 vehicles

Repair completion: 92.92% (latest rate the manufacturer reported to NHTSA; dataset updated November 3, 2026)

Manufacturer campaign 19KWB · Owners notified August 6, 2019 · Vehicles built May 3, 2017 – February 27, 2019 (per NHTSA)

Defect description

PACCAR Incorporated (PACCAR) is recalling certain 2018-2020 T680 and T880 tandem axle vehicles equipped with a parking brake on a single axle and certain models of automated manual transmissions. During cold temperatures, the signal from the park brake pressure switch to the transmission controller may be delayed possibly resulting in the vehicle moving unexpectedly.

Safety consequence

Unexpected vehicle movement may increase the risk of a crash or injury.

Manufacturer remedy

PACCAR will notify owners and dealers will replace the park brake pressure switch, free of charge. PACCAR issued owners and interim notification on June 3, 2019. The recall began August 6, 2019. Owners may contact PACCAR customer service at 1-918-259-3258. PACCAR's number for this recall is 19KWB.

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

Vehicle may Move after Clutch Component Fails

NHTSA #18V931000 · Power Train — Clutch Assembly · NHTSA notice

Reported December 21, 2018 · PACCAR Incorporated

Potentially affected: 25,556 vehicles

Repair completion: 74.69% (latest rate the manufacturer reported to NHTSA; dataset updated November 3, 2026)

Manufacturer campaign 18PBE; 18KWH · Owners notified February 23, 2019 · Vehicles built April 5, 2017 – June 20, 2018 (per NHTSA)

Defect description

PACCAR Incorporated (PACCAR) is recalling certain 2018-2019 Peterbilt 337, 348, 365, 367, 389, 567, 579 and 587 trucks and 2018-2019 Kenworth C500, T270, T370, T440, T660, T680, T800, T880 and W900 trucks equipped with automated manual transmissions. An internal component in the clutch assembly may fail, possibly resulting in unintended vehicle movement.

Safety consequence

Unintended movement of a vehicle can increase the risk of a crash.

Manufacturer remedy

PACCAR will notify owners, and dealers will update the transmission control module, free of charge. The recall began February 23, 2019. Owners may contact PACCAR customer service at 1-940-591-4220. PACCAR's numbers for this recall are 18PBE and 18KWH.

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

Missing Reflex Reflectors on Markers/FMVSS 108

NHTSA #18V816000 · Exterior Lighting · NHTSA notice

Reported November 16, 2018 · PACCAR Incorporated

Potentially affected: 1,619 vehicles

Repair completion: 61.03% (latest rate the manufacturer reported to NHTSA; dataset updated November 3, 2026)

Manufacturer campaign 18KWF & 18PBC · Owners notified January 15, 2019 · Vehicles built March 25, 2013 – October 22, 2018 (per NHTSA)

Defect description

PACCAR Incorporated (PACCAR) is recalling certain 2013-2019 Kenworth T680 and T880 and Peterbilt 579 trucks, greater than 30 feet long and equipped with side extender mounted intermediate marker lamp/turn signals that do not include a reflex reflector. Since both intermediate side marker lamps and reflex reflectors are required, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 108, "Lamps, Reflective Devices, and Associated Equipment."

Safety consequence

Missing reflex reflectors can reduce the vehicle's visibility to other drivers, increasing the risk of a crash.

Manufacturer remedy

PACCAR will notify owners and dealers will install reflex reflective tape, free of charge. The recall began January 15, 2019. Owners may contact PACCAR customer service at 1-918-259-3258. PACCAR's number for this recall is 18KWF, and 18PBC.

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

Fuel Line may Burst if Filter Screen Clogs

NHTSA #18V657000 · Engine and Engine Cooling — Engine — Diesel · NHTSA notice

Reported September 21, 2018 · PACCAR Incorporated

Potentially affected: 48,896 vehicles

Manufacturer campaign 18E081 · Owners notified November 21, 2018 · Vehicles built January 25, 2016 – August 10, 2018 (per NHTSA)

Defect description

PACCAR Incorporated (PACCAR) is recalling certain 2017-2019 Kenworth C500, T600, T660, T680, T800, T880 and W900 trucks, as well as Peterbilt 367, 386, 389, 567, 579 and 587 trucks, equipped with Cummins ISX15 or X15 diesel engines. In certain driving conditions, such as on a long down-hill grade, the fuel line may burst if the fuel pump cooling circuit screen becomes restricted.

Safety consequence

If the fuel line bursts, fuel may leak onto the road resulting in a roadway hazard for other motorists. The engine may also stall without warning, resulting in the vehicle's inability to restart, increasing the risk of a crash.

Manufacturer remedy

Cummins will notify owners, and dealers will replace the suspect fuel pump cooling circuit screen, free of charge. The recall began November 21, 2018. Owners may contact PACCAR customer service at 1-940-591-4220. PACCAR's number for this recall is 18E081.

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

Other Kenworth T680 model years

Check your 2019 Kenworth T680 VIN

Not every recall applies to every VIN in a given year. Enter the 17-character VIN from your Kenworth T680 at nhtsa.gov/recalls to see whether your specific vehicle has an unrepaired recall.

Check a Kenworth VIN