NHTSA vehicle safety data
2014 Mack PINNACLE (CHU) Recalls, Ratings & Complaints
The 2014 Mack PINNACLE (CHU) has 4 NHTSA recall campaigns and 0 owner complaints on file as of October 16, 2026. Recall repairs are usually free at an authorized Mack dealer.
NHTSA recall and complaint data for the 2014 Mack PINNACLE (CHU). Recall data is refreshed daily from NHTSA.
SUSPENSION:FRONT:HUB
NHTSA #16V929000Reported December 23, 2016 · Mack Trucks, Inc.
Potentially affected: 200 vehicles
Defect description
Mack Trucks, Inc. (Mack) is recalling certain model year 2012, 2014-2015 and 2017 Granite (GU), 2012-2017 Pinnacle (CHU, CXU), and 2013-2015 and 2017 Titan (TD) trucks manufactured January 7, 2011, to September 29, 2016. The affected vehicles were built with front wheel hubs that cannot support the gross axle weight rating of the front axle.
Safety consequence
Overloaded front wheel hubs can result in premature failure of the hubs, bearings, and the related components, which can cause the front hub assembly to separate from the front axle. Because of this, the driver may lose control of the vehicle or parts may be dropped on the road, increasing the risk of a crash.
Manufacturer remedy
Mack will notify owners, and dealers will replace the hub assemblies, free of charge. The recall began on February 16, 2017. Owners may contact Mack customer service at 1-800-866-1177. Mack's number for this recall is SC0406.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
POWER TRAIN:DRIVELINE:DRIVESHAFT
NHTSA #16V099000Reported February 19, 2016 · Mack Trucks, Inc.
Potentially affected: 33,981 vehicles
Defect description
Mack Trucks, Inc. (Mack) is recalling certain model year 2012-2016 Granite (GU), Pinnacle (CHU, CXU), TerraPro (LEU, MRU), Titan (TD), and LR trucks manufactured from September 1, 2011, through September 8, 2015. The cap nut that retains the interaxle driveshaft yoke to the rear axle input shaft may loosen.
Safety consequence
If he cap nut loosens and falls off, the yoke can separate from the axle input shaft and allow the drive shaft to disconnect, increasing the risk of a crash.
Manufacturer remedy
Mack will notify owners, and dealers will replace the cap nut. The input shaft threads will be inspected for damage. Any damaged input shaft will be replaced. These repairs will be performed free of charge. An interim notice was sent to owners on April 25, 2016. The recall began on June 7, 2016. Owners may contact Mack customer service at 1-610-709-2131. Mack's recall campaign number for this recall is SC0399.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
TRAILER HITCHES:FIFTH WHEEL ASSEMBLY
NHTSA #15V644000Reported October 13, 2015 · Mack Trucks, Inc.
Potentially affected: 448 vehicles
Defect description
Mack Trucks, Inc. (Mack) is recalling certain model year 2011-2014 Pinnacle (CHU and CXU) trucks manufactured September 10, 2010, to June 17, 2013. The affected trucks are equipped with Fontaine Ultra LT Fifth Wheel connectors, which, due to cumulative damage to the fifth wheel and its locking mechanism, have a locking mechanism that may fail to operate or to properly engage.
Safety consequence
If the fifth wheel and locking mechanism are sufficiently damaged, the locking mechanism may fail to operate as intended and the trailer may unexpectedly detach from the tractor, increasing the risk of a crash.
Manufacturer remedy
Mack will notify owners, and Fontaine dealers will replace the fifth wheel with an Ultra NT model fifth wheel, free of charge. The recall began on November 18, 2015. Owners may contact Mack customer service at 1-800-866-1177. Mack's number for this recall is SC0395.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
ELECTRICAL SYSTEM:WIRING
NHTSA #15V522000Reported August 17, 2015 · Mack Trucks, Inc.
Potentially affected: 62 vehicles
Defect description
Mack Trucks, Inc. (Mack) is recalling certain model year 2013 and 2015 Titan (TD), model year 2014 and 2015 Pinnacle (CHU), and model years 2009-2010, 2012, and 2014-2016 Granite (GU) trucks. The chassis harness and air lines may not be properly clipped to the crossmember, which can allow the cables and air lines to fall and get twisted in the driveline.
Safety consequence
If the electrical cables and air lines were to fall and get tangled in the driveline, it could affect the electrical system and braking system, increasing the risk of a vehicle crash.
Manufacturer remedy
Mack will notify owners, and dealers will inspect the vehicles and properly clip the harness and air lines, free of charge. The recall began on September 30, 2015. Owners may contact Mack customer service at 1-800-528-6586. Mack's number for this recall is SC0393.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Other Mack PINNACLE (CHU) model years
Check your 2014 Mack PINNACLE (CHU) VIN
Not every recall applies to every VIN in a given year. Enter the 17-character VIN from your Mack PINNACLE (CHU) at nhtsa.gov/recalls to see whether your specific vehicle has an unrepaired recall.
Check a Mack VIN