NHTSA Office of Defects Investigation
Preliminary Evaluation PE20-010: Loss of rearview camera
- Closed
NHTSA's Office of Defects Investigation opened Preliminary Evaluation PE20-010 on June 22, 2020 and closed it on November 22, 2020. NHTSA's investigations file lists the Tesla Model S and Model X for it.
Updated daily from NHTSA's investigations file
Key facts
- NHTSA number
- PE20-010 (also written PE20010)
- Investigation type
- Preliminary Evaluation The first stage of most defect investigations: NHTSA's Office of Defects Investigation gathers basic information about a possible safety defect, including from the manufacturer.
- Status
- Closed November 22, 2020
- Opened
- Closed
- Vehicle or equipment manufacturer
- Tesla, Inc.
- Components
- Back Over Prevention — Sensing System — Camera; Electrical System — Instrument Cluster/Panel
- Vehicles and equipment
- Tesla Model S and Model X
A recall appears here only when NHTSA's investigations file links one to the investigation; NHTSA's summary or record can name others.
NHTSA's summary
As NHTSA's Office of Defects Investigation wrote it for Preliminary Evaluation PE20-010.
try.vin does not copy NHTSA's investigation documents; NHTSA's investigation record lists the ones NHTSA has published.
On June 22, 2020, the Office of Defects Investigations (ODI) opened Preliminary Evaluation PE20-010 to investigate incidents of media control unit (MCU) failures resulting in loss of rearview camera in model year (MY) 2012-2015 Tesla Model S vehicles equipped with the NVIDIA Tegra 3 processor with an integrated 8GB eMMC NAND flash memory device. EMMC NAND flash devices have a finite lifespan based upon the number of program/erase (P/E) cycles. The subject MCU allegedly fails prematurely due to memory wear-out of the eMMC NAND flash. Tesla used the same MCU with the Tegra 3 processor in approximately 159 thousand 2012-2018 Model S and 2016-2018 Model X vehicles built by Tesla through early-2018. In response to ODI's Information Request (IR) for PE20-010, Tesla provided ODI with 2,399 complaints and field reports, 7,777 warranty claims, and 4,746 non-warranty claims related to MCU replacements. The data show failure rates over 30 percent in certain build months and accelerating failure trends after 3 to 4 years-in-service.
According to Tesla, for subject vehicles equipped with the NVIDIA Tegra 3 processor with an integrated 8GB eMMC NAND flash memory device, the eMMC NAND cell hardware can fail when reaching lifetime wear, for which the eMMC controller has no available blocks to recover. With this failure mode, the only recovery available is a replacement of the eMMC device, achieved by physical part replacement of either the MCU assembly or visual control module subcomponent. Tesla provided the effects of MCU failure on vehicle function which result in loss of rearview/backup camera, loss of HVAC (defogging) setting controls (if the HVAC status was OFF status prior to failure.) There is also an impact on the advanced driver assistance support (ADAS) Autopilot system, and turn signal functionality due to the possible loss of audible chimes, driver sensing, and alerts associated with these vehicle functions. There are precedents for addressing defects that result in loss of either backup camera, defogging, or turn signal functions under safety recalls.
Tesla has implemented certain Over-The-Air or OTA updates to subject vehicles to mitigate the effects of MCU failure. These updates include firmware changes to reduce memory usage of the subject memory card, improve eMMC error correction and storage management strategies, changing the control logic for turn signal activation, and defaulting the HVAC system to Auto (71.6F) for drives after MCU failure to address windshield defogging. Tesla indicated that the MCU failures are likely to continue to occur in subject vehicles as vehicles continue to operate and use available memory in the 8GB eMMC NAND flash memory until 100% of units have failed. This investigation has been upgraded to an Engineering Analysis (EA20-003). The VOQs associated with the upgrade of this investigation are identified in the attachment to this resume.
Vehicles and equipment listed for this investigation
NHTSA's investigations file lists these vehicles and equipment for Preliminary Evaluation PE20-010. A listed model year means only that an investigation names it; it says nothing about any particular vehicle. Model years with a try.vin recall page link to that page's NHTSA investigations section.
What an NHTSA investigation is
NHTSA's Office of Defects Investigation (ODI) looks into possible safety defects in vehicles and equipment, often after owner complaints. An investigation usually starts as a Preliminary Evaluation, or as a Recall Query when it concerns whether an existing recall covers the right vehicles or fixes the problem, and ODI can upgrade it to a more detailed Engineering Analysis. A Defect Petition asks NHTSA to open an investigation, and Audit and Equipment Queries are administrative investigations into whether companies complied with federal vehicle safety requirements, such as reporting, recall and certification rules.
An open investigation is not a finding that a safety defect exists, and NHTSA can close one without a recall.
To see whether a specific vehicle has an open recall, enter its VIN at nhtsa.gov/recalls.
Tesla VIN check: decode a VIN to see its year, make and model.
Sources
NHTSA's investigation record for PE20-010
Investigation details come from NHTSA's investigations file, which try.vin imports once a day. The investigation types are described from the U.S. Department of Transportation Inspector General's May 2023 report on NHTSA's Office of Defects Investigation, NHTSA's petition rules (49 CFR Parts 552 and 557) and NHTSA's Office of Defects Investigation procedures. How try.vin reads NHTSA investigations.