2010 Ford Fusion Recalls, Ratings & Complaints

Incident: September 9, 2026 · Filed: October 23, 2026

The contact owns a 2010 Ford Fusion. The contact stated that the ABS warning light was illuminated. The contact stated that an independent mechanic replaced the ABS sensors; however, the failure persisted. The contact stated that while driving at approximately 5-10 MPH, the brake pedal went to the floorboard while depressing the brake pedal, causing the stopping distance to be significantly extended. The vehicle was taken to the dealer, where it was diagnosed with ABS pump failure, which resulted in the rear calipers freezing. The contact associated the failure with NHTSA Campaign Number: 19V904000 (Service Brakes, Hydraulic); however, the VIN was not included in the recall. The manufacturer was notified of the failure by phone. The failure mileage was approximately 175,000.

Incident: September 21, 2026 · Filed: September 30, 2026

Electronic power steering

Incident: September 21, 2026 · Filed: September 22, 2026

My brakes felt mushy for a couple days. Next day br a ke fluid dash light came on. brake fluid was so low couldn't see it. Went to autozone bought brake fluid .dot 3 per internet. Internet went on to share the fact thi s p r oblem was recalled. I h a v e none open says major safety problem tow xar immediately.im on s t at e assistance i can't pay to fix

Incident: September 9, 2026 · Filed: September 19, 2026

We have had multiple issues with the ABS and HCU since we bought this car used a couple years ago. We've replaced the ABS Module and HCU and had Ford reprogram it and are still having issues. The brakes go out fully and I went through a red light. The ABS and Traction control and check brake system lights come on. We've spent a couple thousand dollars trying to fix this issue. The brakes have gone out before this incident as well around 95k miles and intermittently since. If needed, contact for invoices.

Incident: August 25, 2026 · Filed: September 15, 2026

The contact owns a 2010 Ford Fusion. The contact stated that while driving approximately 65 MPH, the vehicle became difficult to maneuver and failed to return to normal operation. The advancetrac warning light was illuminated and the "Power Steering Fault" and "Advancetrac Failure" messages were displayed on the instrument panel. The manufacturer was notified of the failure. The failure mileage was approximately 130,000.

Incident: July 1, 2024 · Filed: July 30, 2026

The contact owns a 2010 Ford Fusion. The contact stated that while driving 70 MPH, the vehicle experienced a loss of power steering assist. The traction control warning light was illuminated. The contact decelerated and pulled over to the side of the road. The vehicle was turned off and restarted. The vehicle resumed normal operation. The vehicle was not diagnosed or repaired by an independent mechanic or dealer. The manufacturer was made aware of the failure. The failure mileage was approximately 120,000.

Incident: July 9, 2026 · Filed: July 9, 2026

I was driving my car down the road and all the sudden I couldn't steer my car It caused me to go off the road and hit a ditch

Incident: June 26, 2026 · Filed: July 8, 2026

Lug studs keep breaking off while driving

Incident: June 24, 2026 · Filed: June 24, 2026

The ABS Hydraulic Control Unit (HCU) failed internally due to a stuck valve. The component remains on the vehicle and is available for inspection upon request. While braking normally on a public road, the vehicle hit a minor road bump, causing the ABS to momentarily engage. Immediately following the bump, the brake pedal lost all hydraulic resistance and dropped severely to the floorboard. The vehicle experienced an immediate, drastic reduction in stopping power and an extended braking distance, nearly causing a collision. This sudden loss of braking capability puts the driver, passengers, and other motorists at immediate risk of a severe accident. There were absolutely no warning lamps, error messages, or symptoms prior to hitting the road bump. The braking system functioned completely normally until the exact moment the ABS was triggered by the uneven road surface. The vehicle and its components have not been inspected by the manufacturer, police, or insurance representatives. This identical safety-compromising failure mode (loss of pedal pressure immediately following ABS activation on a bump) is a thoroughly documented defect covered by Ford under Safety Recall 19S54 and Customer Satisfaction Program 21N11. However, because this specific vehicle has a production date falling just outside of Ford's arbitrary manufacturing window (which cut off on July 15, 2009), the vehicle is barred from receiving the safety remedy. This vehicle uses the exact same layout and suffers from the exact same dangerous safety defect. The NHTSA needs to investigate and force an expansion of the vehicle build dates for this recall before this known defect causes a fatal crash.

Incident: June 10, 2025 · Filed: June 15, 2026

The contact owns a 2010 Ford Fusion. The contact stated that while driving at an undisclosed speed, the brake pedal was depressed; however, the vehicle failed to stop as intended. The contact depressed the brake pedal to stop the vehicle. Several warning lights were illuminated. The vehicle was taken to the dealer where it was diagnosed with an ABS module failure. The contact was informed that the ABS module needed to be replaced. The vehicle was not repaired. The dealer made two attempts to replace the part with an aftermarket part. The ABS module was shipped out for the repair; however, the dealer was informed that the part could not be repaired. The vehicle was not repaired. The vehicle was towed to the residence. The contact referenced an unknown recall; however, the VIN was not associated with a recall related to the failure. The manufacturer was made aware of the failure. The failure mileage was approximately 53,000.