NHTSA vehicle safety data

2024 Altec Digger Derrick Recalls & Complaints

The 2024 Altec Digger Derrick has 13 NHTSA recall campaigns on file as of October 21, 2026. try.vin has no NHTSA owner complaints on file for the 2024 Altec Digger Derrick. Recall repairs are usually free at an authorized Altec dealer.

NHTSA recall and complaint data for the 2024 Altec Digger Derrick. Recall data is refreshed daily from NHTSA.

Front Bumper May Detach

NHTSA #26V665000 · Structure — Body — Bumpers · NHTSA notice

Reported October 9, 2026 · Altec Industries, Inc.

Potentially affected: 45 vehicles

Completion not yet reported (dataset updated October 21, 2026)

Altec campaign CSN-3375 · Vehicles built through April 30, 2024 (per NHTSA)

Defect description

Altec Industries, Inc. (Altec) is recalling certain 2023-2024 Digger Derrick vehicles. The front winch bumper may be secured with incorrect bolts, which can cause the bumper to detach from the vehicle.

Safety consequence

A front bumper that detaches can become a road hazard and increase the risk of a crash. In addition, the bolts can fail suddenly during winch operation, increasing the risk of injury.

Manufacturer remedy

Altec will install the correct bolts on the front bumper, free of charge. Owner notification letters will be mailed December 4, 2026. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN-3375.

Platform Access Step May Separate from Vehicle

NHTSA #26V637000 · Structure — Body — Step/Ladder · NHTSA notice

Reported October 2, 2026 · Altec Industries, Inc.

Potentially affected: 6,780 vehicles

Completion not yet reported (dataset updated October 21, 2026)

Altec campaign CSN-3374 · Vehicles built starting January 1, 2024 (per NHTSA)

Defect description

Altec Industries, Inc. (Altec) is recalling certain 2020-2026 AA Series Aerial Device, 2021-2026 AN Series Aerial Device, 2023-2026 AM Series Aerial Device, and 2024-2026 Digger Derrick, and 2024-2025 A-Class vehicles. The turntable mounted platform access step may have been improperly welded between the step tube and mounting plate, and allow the step to separate from the vehicle.

Safety consequence

A step that separates or becomes unstable while in use, increases the risk of a fall or injury.

Manufacturer remedy

Altec will replace the steps, free of charge. Owner notification letters are expected to be mailed November 27, 2026. Owners may contact Altec's customer service at 1-877-462-5832. Altec's number for this recall is CSN-3374.

Boom Stow Auto-Neutral System Improperly Wired

NHTSA #26V617000 · Electrical System — Wiring · NHTSA notice

Reported September 24, 2026 · Altec Industries, Inc.

Potentially affected: 143 vehicles

Completion not yet reported (dataset updated October 21, 2026)

Altec campaign CSN-3370

Defect description

Altec Industries, Inc. (Altec) is recalling certain 2021-2026 Altec Digger Derrick, and 2023-2025 Altec TA Series Aerial Device vehicles. Improper wiring may prevent the boom stow auto-neutral feature from engaging, which can allow the truck to be driven while the boom is still elevated.

Safety consequence

When the vehicle is moved or driven with the boom out of stow, the vehicle could exceed the recorded travel height, increasing the risk of a crash.

Manufacturer remedy

Altec will correct the wiring in the power distribution module to enable the boom stow auto-neutral functionality, free of charge. Owner notification letters are expected to be mailed November 20, 2026. Owners may contact Altec's customer service at 1-877-462-5832. Altec's number for this recall is CSN-3370.

Automatic Brake System Improperly Calibrated

NHTSA #26V541000 · Forward Collision Avoidance — Automatic Emergency Braking · NHTSA notice

Reported August 21, 2026 · Altec Industries, Inc.

Potentially affected: 55 vehicles

Completion not yet reported (dataset updated October 21, 2026)

Altec campaign CSN-3356

Defect description

Altec Industries, Inc. (Altec) is recalling certain 2019-2026 AN Series, 2023 AA Series, 2022-2026 Digger Derrick, and 2025 AM Series vehicles. The Bendix automatic braking system was not recalibrated after relocating the front radar box.

Safety consequence

An improperly calibrated system may have a delayed braking response, increasing the risk of a crash.

Manufacturer remedy

Altec will update the collision mitigation system with the revised the parameters, recalibrate, and test the system, free of charge. Owner notification letters are expected to be mailed October 16, 2026. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN-3356.

Incorrect Pole Rack Capacity Rating

NHTSA #26V409000 · Equipment — Mechanical — Carrier/Rack · NHTSA notice

Reported June 26, 2026 · Altec Industries, Inc.

Potentially affected: 6 vehicles

Completion not yet reported (dataset updated October 21, 2026)

Altec campaign CSN-3335 · Owners notified August 18, 2026

Defect description

Altec Industries, Inc. (Altec) is recalling certain 2023-2025 Digger Derrick vehicles. The vertical center of gravity with poles in the pole rack was not calculated properly, resulting in an incorrect pole rack capacity rating.

Safety consequence

While using the pole rack at full capacity, an incorrect high vertical center of gravity during braking and cornering may lead to a loss of vehicle control, increasing the risk of a crash.

Manufacturer remedy

Altec will provide owners with a safety alert placard, free of charge. Owner notification letters are expected to be mailed August 21, 2026. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN-3335.

Incorrect Low Tire Pressure on Certification Label

NHTSA #26V150000 · Equipment — Other — Labels · NHTSA notice

Reported March 13, 2026 · Altec Industries, Inc.

Potentially affected: 10,875 vehicles

Repair completion: 23.39% (latest rate the manufacturer reported to NHTSA; dataset updated October 21, 2026)

Altec campaign CSN-3294 · Owners notified May 11, 2026

Defect description

Altec Industries, Inc. (Altec) is recalling certain 2023-2026 Service Body, Aerial Device, Pressure Digger, Spray Truck, and Digger Derrick vehicles. The low tire pressure rating printed on the final stage certification label is incorrect.

Safety consequence

An incorrect pressure rating may lead to underinflated tires, increasing the risk of a tire blowout or a crash.

Manufacturer remedy

Altec will inspect and replace the incorrect certification label, free of charge. Owner notification letters were mailed May 11, 2026. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN-3294.

Chassis Engine May Start Unexpectedly

NHTSA #26V071000 · Electrical System — Wiring — Power Distribution Module/Ipdm · NHTSA notice

Reported February 6, 2026 · Altec Industries, Inc.

Potentially affected: 57 vehicles

Repair completion: 94.74% (latest rate the manufacturer reported to NHTSA; dataset updated October 21, 2026)

Altec campaign CSN-3281 · Owners notified March 27, 2026

Defect description

Altec Industries, Inc. (Altec) is recalling certain 2021-2025 Digger Derrick and 2021-2025 AM Series Aerial Device vehicles. The chassis engine may start unintentionally due to a missing diode in the Altec power distribution module.

Safety consequence

An engine that starts unexpectedly increases the risk of injury to anyone near the engine compartment during maintenance operations.

Manufacturer remedy

Altec will provide instructions to inspect the power distribution module for a diode, and provide a repair kit as necessary, free of charge. Owner notification letters were mailed March 27, 2026. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN-3281.

Inadequate Fuse Protection Can Cause Fire

NHTSA #25V890000 · Electrical System — Wiring — Fuses and Circuit Breakers · NHTSA notice

Reported December 18, 2025 · Altec Industries, Inc.

Potentially affected: 152 vehicles

Repair completion: 63.16% (latest rate the manufacturer reported to NHTSA; dataset updated October 21, 2026)

Altec campaign CSN-3271 · Owners notified February 13, 2026

Defect description

Altec Industries, Inc. (Altec) is recalling certain 2023-2025 Aerial Device and Digger Derrick vehicles. The electronic taillight module harness may have inadequate circuit protection.

Safety consequence

Wiring without adequate protection may short circuit, increasing the risk of a fire.

Manufacturer remedy

Altec will provide instructions on inspecting and updating the circuit as necessary, free of charge. Owner notification letters were mailed February 13, 2026. Owners may contact Altec customer service at 1-877-462-5832.

Blown Fuse May Cause Engine Shutdown

NHTSA #25V581000 · Electrical System — Ignition · NHTSA notice

Reported September 5, 2025 · Altec Industries, Inc.

Potentially affected: 19 vehicles

Repair completion: 68.42% (latest rate the manufacturer reported to NHTSA; dataset updated October 21, 2026)

Altec campaign CSN-3247 · Owners notified October 29, 2025 · Vehicles built starting July 1, 2024 (per NHTSA)

Defect description

Altec Industries, Inc. (Altec) is recalling certain 2024-2025 Altec Aerial Device, and Digger Derrick vehicles. The chassis ignition circuit may be overloaded, which can result in a blown fuse and cause an engine shutdown.

Safety consequence

An engine shutdown increases the risk of a crash.

Manufacturer remedy

Altec will replace the hydraulic tank heater relay, free of charge. Owner notification letters were mailed October 29, 2025. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN-3247. This recall is an expansion of NHTSA recall number 24V681.

Cable Entry Step May Detach

NHTSA #25V562000 · Structure — Frame and Members · NHTSA notice

Reported August 29, 2025 · Altec Industries, Inc.

Potentially affected: 903 vehicles

Repair completion: 67.77% (latest rate the manufacturer reported to NHTSA; dataset updated October 21, 2026)

Altec campaign CSN-3246 · Owners notified October 24, 2025

Defect description

Altec Industries Inc. (Altec) is recalling certain 2011-2025 Aerial Device, Digger Derrick, and 2022-2025 Service Body vehicles. The cable step wire rope assembly may be improperly secured, which can allow the cable entry step to detach from the vehicle.

Safety consequence

A cable step that fails during use increases the risk of injury.

Manufacturer remedy

Altec will provide owners with instructions to inspect the cable crimps. If the cables are improperly crimped, Altec will provide instructions and a kit to replace the wire rope assemblies. Repairs will be performed free of charge. Owner notification letters were mailed October 24, 2025. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN-3246.

Front Bumper May Detach

NHTSA #25V529000 · Structure — Body — Bumpers · NHTSA notice

Reported August 14, 2025 · Altec Industries, Inc.

Potentially affected: 124 vehicles

Repair completion: 71.77% (latest rate the manufacturer reported to NHTSA; dataset updated October 21, 2026)

Altec campaign CSN-3244 · Owners notified October 10, 2025 · Vehicles built starting November 7, 2024 (per NHTSA)

Defect description

Altec Industries, Inc. (Altec) is recalling certain 2024-2025 Aerial Device, and Digger Derrick vehicles. The front winch bumper may be secured with incorrect bolts, which can cause the bumper to detach from the vehicle.

Safety consequence

A front bumper that detaches can become a road hazard and increase the risk of a crash. In addition, the bolts can fail suddenly during winch operation, increasing the risk of injury.

Manufacturer remedy

Altec will replace the bolts, free of charge. Owner notification letters were mailed October 10, 2025. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN-3244.

Unseated Retaining Ring May Cause Cylinder Failure

NHTSA #25V251000 · Equipment — Mechanical — Boom/Crane/Ladder · NHTSA notice

Reported April 17, 2025 · Altec Industries, Inc.

Potentially affected: 900 vehicles

Repair completion: 64.56% (latest rate the manufacturer reported to NHTSA; dataset updated October 21, 2026)

Altec campaign CSN-3223 · Owners notified June 13, 2025

Defect description

Altec Industries, Inc. (Altec) is recalling certain 2024-2025 Digger Derrick vehicles. An improperly seated retaining ring may cause the hydraulic cylinder to lose pressure, resulting in unintended boom movement.

Safety consequence

Unintended boom movement increases the risk of injury.

Manufacturer remedy

Dealers will replace the counterbalance valves, free of charge. Owner notification letters were mailed June 13, 2025. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN-3223.

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY: 1-888-275-9171), or go to www.nhtsa.gov.

Blown Fuse May Cause Engine Shutdown

NHTSA #24V681000 · Electrical System — Ignition · NHTSA notice

Reported September 12, 2024 · Altec Industries, Inc.

Potentially affected: 968 vehicles

Repair completion: 74.48% (latest rate the manufacturer reported to NHTSA; dataset updated October 21, 2026)

Altec campaign CSN-3185 · Owners notified November 8, 2024

Defect description

Altec Industries, Inc. (Altec) is recalling certain 2023-2024 Altec Aerial Device, Digger Derrick, and Pressure Digger vehicles. The chassis ignition circuit may be overloaded, which can result in a blown fuse and cause an engine shutdown.

Safety consequence

An engine shutdown increases the risk of a crash.

Manufacturer remedy

Altec will rewire the accessory circuit, free of charge. Owner notification letters were mailed November 8, 2024. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN-3185.

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.

Other Altec Digger Derrick model years

Check your 2024 Altec Digger Derrick VIN

Not every recall applies to every VIN in a given year. Enter the 17-character VIN from your Altec Digger Derrick at nhtsa.gov/recalls to see whether your specific vehicle has an unrepaired recall.

Check an Altec VIN