2019 Acura TLX Recalls, Ratings & Complaints

Incident: October 4, 2026 · Filed: October 12, 2026

- The engine ceased while the car was moving, causing (a) A sudden stop (b) Engine stopping and the car becoming inoperable in the middle of a street. - There were no injuries because the failure happened at low speed. The same failure on an expressway would be a major safety concern since the car came to sudden stop. - The failed engine was inspected by an authorized Acura dealer. Cause identified as cylinder 2 rod bearing failure. - There was a slight knocking sound right before the incident occured - The car was driving fine before the incident. There were no warning indicators. - The engine (short block) was replaced previously on the same car due to a knocking sound.

Incident: September 1, 2024 · Filed: September 4, 2026

The internal spring inside my driver's side sun visor completely failed and now the visor hangs down and totally blocks my view of the road while driving. It is a major safety hazard because I literally have to duck to see traffic in front of me and I keep hitting my head on it. If I get into an accident and the airbags deploy, this loose plastic visor is going to smash right into my face. Acura knows this is a massive defect across thousands of these cars, but they haven't issued a recall and the replacement part is completely backordered nationwide, leaving me stuck driving a car where I can't safely see the road.

Incident: June 29, 2026 · Filed: July 22, 2026

The contact owns a 2019 Acura TLX. The contact received notification of NHTSA Campaign Number: 23V751000 (Engine and Engine Cooling). The contact stated that while driving approximately 55 MPH, the vehicle lost power and the steering wheel failed to responded as needed. The vehicle stalled in the middle of the road. The vehicle was restarted but stalled immediately. The contact inspected the vehicle but found no fault. The vehicle was towed to an independent mechanic where it was diagnosed that the rod bearing had failed and the engine needed to be replaced. The vehicle was not repaired. The vehicle was then towed to a dealer where it was diagnosed that the rod bearing had failed and that the engine needed to be replaced. The vehicle was not repaired. The manufacturer was notified of the failure. The failure mileage was approximately 120,000.

Incident: January 1, 2026 · Filed: May 30, 2026

Both headlight lenses on my 2019 Acura TLX developed severe internal stress cracking (crazing) with no external damage of any kind. The cracking appears to originate from inside the housing, consistent with heat stress or a manufacturing defect. Both headlights cracked identically and simultaneously, which rules out accidental damage. Acura corporate has denied a goodwill repair, classifying this as normal wear and tear. Estimated repair cost is 4,000. I believe this is a manufacturing defect and may affect other 2019 Acura TLX owners.

Incident: March 23, 2026 · Filed: May 27, 2026

I am formally requesting a neutral third-party arbitration review under the Magnuson-Moss Warranty Act to compel American Honda Motor Co. to provide a permanent mechanical remedy—specifically, the sourcing and installation of a brand-new, redesigned engine assembly (Engine #Four)— This vehicle frame is now on its third engine block. Car was bought 11/30/2024. At Grubbs Acura, fuel pump safety recall that involves flashing/re-calibrating the Engine Control Unit (FI-ECU) software was done. Just a few weeks after new fuel pump, the vehicle displayed sudden stalling symptoms. The engine suffered a terminal, catastrophic internal collapse. The vehicle was towed to Grubbs Acura where Corporate Honda directed a forced out-of-pocket internal engine teardown. The physical teardown explicitly confirmed a catastrophic connecting rod bearing failure (spun bearing) identical to the structural manufacturing flaws currently under active federal investigation by the NHTSA under Preliminary Evaluation PE25008 / RQ24-025. Corporate Honda subsequently issued a verbal agreement to fully reimburse my out-of-pocket teardown fees. Because a manufacturer will never fund diagnostic labor if evidence of owner fault is present, this corporate reimbursement serves as formal validation that no owner maintenance neglect occurred, and that the engine died exclusively from an inherent component defect. Gunn Acura (San Antonio, TX) confirmed with my vin, that Engine #3 was a warranty/dealer-installed replacement unit at 22,000 miles. It failed after less than 40,000 miles of total operation. A professionally manufactured and dealer-installed engine is reasonably expected to last well beyond 40,000 miles. The manufacturer network cannot utilize arbitrary part-ownership rules or uncooperative, fragmented dealer communications. The original factory-installed engine and the dealer-installed replacement engine both suffered identical connecting rod bearing failures.

Incident: October 23, 2024 · Filed: May 7, 2026

The contact owns a 2019 Acura TLX. The contact stated that while driving on the highway, the vehicle intermittently started to accelerate slowly and then it unexpectedly surges forward. The dealer was contacted regarding the issue but the vehicle was not diagnosed or repaired. The failure mileage was unavailable.

Incident: March 17, 2026 · Filed: March 19, 2026

I am filing a formal safety complaint regarding the execution of NHTSA Recall 24-002 (Connecting Rod Bearing Replacement) by an authorized Acura dealership, and a fundamental safety flaw in Acura’s official Service Bulletin for this recall. My vehicle underwent "Repair #1" under this recall, which involved opening the engine block and replacing the rod bearings due to a factory defect that causes metal-on-metal wear. However, upon picking up my vehicle, I discovered the dealership left the old, dirty oil filter attached to the engine. I reviewed Acura’s Service Bulletin 24-002 and realized the "Required Materials" list explicitly omits a new oil filter for Repair #1. Because dealerships strictly follow this bulletin for warranty reimbursement, they are systematically leaving old filters on engines that just received new bearings. This means old, metal-contaminated oil trapped in the filter is immediately recirculated through the brand-new precision bearings. This procedural flaw directly jeopardizes the integrity of the engine, completely undermining the purpose of the safety recall and putting drivers at risk of sudden engine failure at highway speeds. I have time-stamped video and photographic evidence of my vehicle’s mileage (61,325) and the untouched, original oil filter immediately after returning home from the dealership. Acura Corporate was contacted regarding this procedural negligence and failed to provide a resolution. I am requesting the NHTSA investigate Acura's repair procedures for Recall 24-002 to prevent further unsafe vehicle modifications.

Incident: February 27, 2026 · Filed: March 18, 2026

The contact owned a 2019 Acura TLX. The contact stated that while pulling into a detached garage at 3-5 MPH, the vehicle suddenly accelerated through the wall and was hanging out 2/3 of the way. The contact sustained injuries to his head, and medical attention was not provided. The air bag deployed as designed. There were no warning lights illuminated. There was no reported fire. A police report was filed. The building inspector and fire department were on the scene. The vehicle was towed to a tow lot by the insurance company. The local dealer was not contacted. The vehicle was not diagnosed or repaired. The manufacturer was contacted, but no assistance was provided. The failure mileage was approximately 14,500. The vehicle was deemed a total loss.

Incident: October 31, 2025 · Filed: February 17, 2026

My engine has been replaced under warranty for connecting rod bearings failing before the recall 23V-751 existed. 40,000 miles later it failed again. I have paper work and other information available upon request. The vehicle is currently on it's third short block replaced by Acura. No CEL or anything prior to when the knocking started.

Incident: November 28, 2025 · Filed: December 2, 2025

The contact owned a 2019 Acura TLX. The contact stated that while driving at approximately 65 MPH the vehicle was losing forward velocity and the steering was pulling slightly to the right. The contact stated that the vehicle suddenly and violently turned to the right. The contact was not aware of any warning lights. The contact was unable to counter turn and the vehicle crashed into the guard rail on the right front bumper. The contact stated that the force of the crash shot his vehicle to the left, crossed two lanes of traffic and crashed into the guard rail on the left side of the highway. The contact stated that this crash with the guardrail deployed the drivers side curtain air bag. The contact stated that the force of the crash shot the vehicle to the right and he drove off of the roadway down a slight embankment. The contact was able to stop and exit the vehicle. The contact saw that front bumper had sheared off and that the right fender and wheel well were crushed. The contact stated that the he could see the right tire suspension and control arms were exposed and fractured. The contact stated that the damage of the left side of the vehicle was not as severe. The contact stated that the passenger side curtain air bag had also deployed. The contact stated that the police were on scene and wrote a report. The contact stated that he was transported by ambulance to the ER. The contact stated that he had bruises and cuts on his right temple and check and swelling, cuts and bruises on the left cheek and left temple and forehead. The contact stated he was released after treatment. The contact stated that the vehicle had been towed to an impound lot. The manufacturer was not informed of the failure. The contact had received recall notice for NHTSA Campaign Number: 23V751000 (Engine and Engine Cooling) and related the failure to the recall. The failure mileage was approximately 48,000.