NHTSA vehicle safety data
1999 Navistar 2600 Recalls & Complaints
The 1999 Navistar 2600 has 2 NHTSA recall campaigns on file as of October 21, 2026. try.vin has no NHTSA owner complaints on file for the 1999 Navistar 2600. Recall repairs are usually free at an authorized Navistar dealer.
NHTSA recall and complaint data for the 1999 Navistar 2600. Recall data is refreshed daily from NHTSA.
NAVISTAR/AIR BRAKES
NHTSA #99V055001 · Service Brakes, Air · NHTSA notice
Reported March 16, 1999 · INTERNATIONAL TRUCK AND ENGINE
Potentially affected: 1,547 vehicles
Manufacturer campaign 99504 · Owners notified March 22, 1999 · Vehicles built January 11, 1999 – January 20, 1999 (per NHTSA)
Defect description
VEHICLE DESCRIPTION: HEAVY DUTY TRUCKS, TRANSIT AND SCHOOL BUSES, EQUIPPED WITH MERITOR AIR BRAKE AUTOMATIC SLACK ADJUSTERS. SOME OF THE AUTOMATIC SLACK ADJUSTERS HAD INSUFFICIENT TORQUE APPLIED TO THE GUIDE PAWL CAP SCREW.
Safety consequence
WITHOUT SUFFICIENT TORQUE ON THE GUIDE PAWL CAP SCREW, THE BRAKES COULD GRADUALLY LOSE ADJUSTMENT, INCREASING THE VEHICLE STOPPING DISTANCE.
Manufacturer remedy
DEALERS WILL CHECK THE TORQUE ON THE AUTOMATIC SLACK ADJUSTER GUIDE PAWL. IF THERE IS NO TORQUE, THE BRAKES WILL BE ADJUSTED AND THE GUIDE PAWL WILL BE TIGHTENED TO 15-20 FT. LBS.
Notes
OWNER NOTIFICATION BEGAN MARCH 22, 1999.OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT NAVISTAR AT 1-800-448-7825. ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S AUTO SAFETY HOTLINE AT 1-888-DASH-2-DOT (1-888-327-4236).
NAVISTAR/INNER WHEEL CONE
NHTSA #99V014002 · Suspension — Front — Wheel Bearing · NHTSA notice
Reported March 15, 1999 · INTERNATIONAL TRUCK AND ENGINE
Potentially affected: 4,024 vehicles
Manufacturer campaign 99503 · Owners notified March 29, 1999 · Vehicles built March 1, 1998 – October 16, 1998 (per NHTSA)
Defect description
VEHICLE DESCRIPTION: CLASS 8 HEAVY DUTY TRUCK CHASSIS EQUIPPED WITH 16,000 LB., 18,000 LB., OR 20,000 LB. HEAVY DUTY STEERING AXLES. THE INNER WHEEL BEARING CONE FOR THE STEERING AXLE WHEEL HUB ASSEMBLY DOES NOT PROPERLY FIT ONTO THE NAVISTAR STEERING AXLE SPINDLE ASSEMBLY. IMPROPER FIT OF THE BEARING TO THE SPINDLE INCREASES THE STRESS LEVELS TO THE STEERING AXLE SPINDLE WHICH COULD CAUSE SPINDLE FAILURE.
Safety consequence
IF THE SPINDLE FAILS, A LOSS OF DRIVER CONTROL COULD OCCUR, INCREASING THE RISK OF A VEHICLE CRASH.
Manufacturer remedy
DEALERS WILL REMOVE THE LEFT AND RIGHT HUB/DRUM ASSEMBLIES FROM THE STEERING AXLES AND REPLACE THE INNER WHEEL BEARING CONES AND CUPS.
Notes
OWNER NOTIFICATION BEGAN MARCH 29, 1999. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT NAAVISTAR AT 1-800-448-7825.ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S AUTO SAFETY HOTLINE AT 1-888-DASH-2-DOT (1-888-327-4236).
Other Navistar 2600 model years
Check your 1999 Navistar 2600 VIN
Not every recall applies to every VIN in a given year. Enter the 17-character VIN from your Navistar 2600 at nhtsa.gov/recalls to see whether your specific vehicle has an unrepaired recall.
Check a Navistar VIN