NHTSA vehicle safety data
2013 Itasca Ellipse Recalls, Ratings & Complaints
The 2013 Itasca Ellipse has 2 NHTSA recall campaigns and 0 owner complaints on file as of October 16, 2026. Recall repairs are usually free at an authorized Itasca dealer.
NHTSA recall and complaint data for the 2013 Itasca Ellipse. Recall data is refreshed daily from NHTSA.
EXTERIOR LIGHTING:TURN SIGNAL
NHTSA #24V733000Reported October 1, 2024 · Winnebago Industries, Inc.
Potentially affected: 17,329 vehicles
Defect description
Winnebago Industries, Inc. (Winnebago) is recalling certain 2013-2017 Tour, 2013-2018 Journey, 2014-2022 Forza, 2015-2016 Brave, 2015-2019 Grand Tour, 2015-2021 Vista, 2016-2018 Adventurer, Sightseer, 2016-2021 Commercial Vehicle, 2018-2021 Intent, Sunstar, 2018-2020 Horizon, Itasca 2013-2017 Ellipse, Meridian, 2014-2017 Solei, 2015-2016 Tribute, 2015-2018 Sunstar, 2016-2018 Suncruiser, and Sunova motorhomes. The turn signals may have a smaller than required luminous lens area. As such these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) Number 108, "Lamps, Reflective Devices, and Associated Equipment."
Safety consequence
A small lens can make it difficult for other drivers to see the turn signal, increasing the risk of a crash.
Manufacturer remedy
Dealers will replace the turn signals, free of charge. Owner notification letters were mailed April 17, 2026. Owners may contact Winnebago Customer Care at 1-800-537-1885. Winnebago's number for this recall is 189.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
ELECTRICAL SYSTEM
NHTSA #12V566000Reported December 6, 2012 · Winnebago Industries Inc.
Potentially affected: 1,521 vehicles
Defect description
Winnebago Industries is recalling certain model year 2010-2013 Winnebago Journey and Tour motorhomes, and certain model year 2010-2013 Itasca Meridian and Ellipse motorhomes, manufactured June 18, 2010, through November 17, 2011. The chassis are equipped with connectors for diode jumpers that may come loose, resulting in an open circuit. Two circuits are affected: The one that disengages the cruise control with brake pedal use, and the one that illuminates the brake lights with brake pedal use.
Safety consequence
Failure of the cruise control to disengage when the brakes are applied may increase the risk of a vehicle crash. Without the brake lights illuminating when the brakes are applied, the driver's intent is not communicated, increasing the risk of a crash.
Manufacturer remedy
Daimler Trucks North America will be conducting the recall on behalf of Winnebago Industries. Daimler will notify owners, and dealers will inspect the the diode jumpers to make sure they are fully locked in place and will correct the vehicles as needed. The recall began December 26, 2012. Owners should contact Winnebago at 1-641-585-3535 or Daimler Trucks at 1-503-745-6910.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Other Itasca Ellipse model years
Check your 2013 Itasca Ellipse VIN
Not every recall applies to every VIN in a given year. Enter the 17-character VIN from your Itasca Ellipse at nhtsa.gov/recalls to see whether your specific vehicle has an unrepaired recall.
Check an Itasca VIN