NHTSA Office of Defects Investigation
Recall Query RQ24-006: Front Seat Belt Assemblies may be Missing the Rivet that Secures the Quick Connector and Wire Plate
- Closed
NHTSA's Office of Defects Investigation opened Recall Query RQ24-006 on April 4, 2024 and closed it on March 26, 2025. NHTSA's investigations file lists 3 Honda models for it.
Updated daily from NHTSA's investigations file
Key facts
- NHTSA number
- RQ24-006 (also written RQ24006)
- Investigation type
- Recall Query An investigation into whether an existing recall covers the right vehicles or whether its remedy works, run much like a Preliminary Evaluation.
- Status
- Closed March 26, 2025
- Opened
- Closed
- Vehicle or equipment manufacturer
- Honda (American Honda Motor Co.)
- Components
- Seat Belts; Seat Belts — Front
- Vehicles and equipment
- 3 Honda models, including the Accord and Accord Hybrid
A recall appears here only when NHTSA's investigations file links one to the investigation; NHTSA's summary or record can name others.
NHTSA's summary
As NHTSA's Office of Defects Investigation wrote it for Recall Query RQ24-006.
On April 4, 2024, the Office of Defects Investigations (ODI) opened RQ24006 to investigate American Honda Motor Co.’s (Honda’s) proposed remedy for recall 23V-782 as well as scope of the vehicles involved. Honda issued recall 23V-782 on November 21, 2023, which concerns certain model year (MY) 2023-2024 Honda Accord, Honda Accord Hybrid, and Honda HR-V vehicles. Recall 23V-782 states that the driver and front passenger seat belt pretensioner assemblies may have been manufactured without a rivet that secures the pretensioner quick connector and wire plate. Recall documentation states that seat belt pretensioner assemblies that are missing the rivet will not properly restrain the occupant in the event of a collision, increasing the risk of injury.
Subject defective seat belt assemblies are installed as original equipment for both the driver and front passenger positions for the HR-V, but only for the driver position for the Accord and Accord Hybrid. The recall remedy for 23V-782 instructs the technician to inspect both front seat belt pretensioner assemblies and, if necessary, replace them. The inspection procedure requires the technician to utilize a pull force gauge to determine whether the subject component is missing the subject rivet and requires replacement. Parts requiring replacement are determined by whether the pretensioner quick connector separates from the pretensioner assembly while the technician is pulling on the seat belt. If no separation occurs, then the part is determined to be not defective and not require replacement. There have been no reports alleging a failure of seat belt pretensioner assemblies after the inspect and replace remedy for recall 23V-782 was performed. Additionally, no comparable failures have been observed in field data for similar vehicles outside of the scope of the recall. As of the 4th quarter of 2024, the recall completion rate is at approximately 84% of the total recalled population. In view of the lack of failures after the remedy for recall 23V-782 was performed, and the lack of failures in similar vehicles outside of the scope of the recall, ODI is closing this Recall Query (RQ). The Agency reserves the right to take additional action if warranted by future circumstances.
Vehicles and equipment listed for this investigation
NHTSA's investigations file lists these vehicles and equipment for Recall Query RQ24-006. A listed model year means only that an investigation names it; it says nothing about any particular vehicle. Model years with a try.vin recall page link to that page's NHTSA investigations section.
What an NHTSA investigation is
NHTSA's Office of Defects Investigation (ODI) looks into possible safety defects in vehicles and equipment, often after owner complaints. An investigation usually starts as a Preliminary Evaluation, or as a Recall Query when it concerns whether an existing recall covers the right vehicles or fixes the problem, and ODI can upgrade it to a more detailed Engineering Analysis. A Defect Petition asks NHTSA to open an investigation, and Audit and Equipment Queries are administrative investigations into whether companies complied with federal vehicle safety requirements, such as reporting, recall and certification rules.
An open investigation is not a finding that a safety defect exists, and NHTSA can close one without a recall.
To see whether a specific vehicle has an open recall, enter its VIN at nhtsa.gov/recalls.
Honda VIN check: decode a VIN to see its year, make and model.
Sources
NHTSA's investigation record for RQ24-006
Investigation details come from NHTSA's investigations file, which try.vin imports once a day. The investigation types are described from the U.S. Department of Transportation Inspector General's May 2023 report on NHTSA's Office of Defects Investigation, NHTSA's petition rules (49 CFR Parts 552 and 557) and NHTSA's Office of Defects Investigation procedures. How try.vin reads NHTSA investigations.