NHTSA Office of Defects Investigation
Preliminary Evaluation PE24-020: 2021 Nissan Rogue Inner Tie Rod Failures
- Closed
NHTSA's Office of Defects Investigation opened Preliminary Evaluation PE24-020 on August 5, 2024 and closed it on August 24, 2026. NHTSA's investigations file lists the 2021–2023 Nissan Rogue for it.
Updated daily from NHTSA's investigations file
Key facts
- NHTSA number
- PE24-020 (also written PE24020)
- Investigation type
- Preliminary Evaluation The first stage of most defect investigations: NHTSA's Office of Defects Investigation gathers basic information about a possible safety defect, including from the manufacturer.
- Status
- Closed August 24, 2026
- Opened
- Closed
- Vehicle or equipment manufacturer
- Nissan North America, Inc.
- Component
- Steering — Linkages — Tie Rod Assembly
- Vehicles and equipment
- 2021–2023 Nissan Rogue
A recall appears here only when NHTSA's investigations file links one to the investigation; NHTSA's summary or record can name others.
NHTSA's summary
As NHTSA's Office of Defects Investigation wrote it for Preliminary Evaluation PE24-020.
try.vin does not copy NHTSA's investigation documents; NHTSA's investigation record lists the ones NHTSA has published.
The Office of Defects Investigation (ODI) opened this investigation to assess allegations of tie rod bending, deformation, or related steering linkage damage in certain 2021 Nissan Rogue vehicles. A bent tie rod can affect wheel alignment and steering geometry, and in some circumstances may result in steering pull, abnormal tire wear, reduced steering precision, difficulty maintaining directional control, or loss of vehicle steering control, increasing the risk of a crash. ODI reviewed Vehicle Owner Questionnaires (VOQs), Early Warning Reporting data, manufacturer field reports, warranty claims, consumer complaints submitted to the manufacturer, and other information provided by Nissan in response to ODI’s information request. ODI also evaluated the reported failure circumstances, vehicle age and mileage, incident severity, and whether the available evidence indicated a defect trend occurring in the absence of external impact or other non-defect causes. Based on the information reviewed, ODI identified a low number of tie rod bending or deformation allegations relative to the subject vehicle population and exposure. The available reports did not indicate a consistent failure pattern, common production period, common mileage, or repeatable failure mode suggestive of a safety-related defect. Many of the reviewed incidents involved circumstances consistent with external loading or impact-related damage, including pothole strikes, curb contact, road debris impacts, prior collision damage, or other abnormal steering/suspension loads. ODI’s analysis did not identify a trend of tie rod bending occurring during normal vehicle operation without evidence of external influence. The complaint and warranty rates were low, and ODI did not identify a pattern of crashes, injuries, or loss-of-control events attributable to a tie rod defect in the subject vehicles. Accordingly, this investigation is closed. The closing of this investigation does not constitute a finding by NHTSA that a safety-related defect does not exist. The agency reserves the right to take further action if warranted by new circumstances or additional information. To review the ODI reports cited in the Closing Resume ODI Report Identification Number document, go to NHTSA.gov.
Vehicles and equipment listed for this investigation
NHTSA's investigations file lists these vehicles and equipment for Preliminary Evaluation PE24-020. A listed model year means only that an investigation names it; it says nothing about any particular vehicle. Model years with a try.vin recall page link to that page's NHTSA investigations section.
Nissan
All Nissan recallsWhat an NHTSA investigation is
NHTSA's Office of Defects Investigation (ODI) looks into possible safety defects in vehicles and equipment, often after owner complaints. An investigation usually starts as a Preliminary Evaluation, or as a Recall Query when it concerns whether an existing recall covers the right vehicles or fixes the problem, and ODI can upgrade it to a more detailed Engineering Analysis. A Defect Petition asks NHTSA to open an investigation, and Audit and Equipment Queries are administrative investigations into whether companies complied with federal vehicle safety requirements, such as reporting, recall and certification rules.
An open investigation is not a finding that a safety defect exists, and NHTSA can close one without a recall.
To see whether a specific vehicle has an open recall, enter its VIN at nhtsa.gov/recalls.
Nissan VIN check: decode a VIN to see its year, make and model.
Sources
NHTSA's investigation record for PE24-020
Investigation details come from NHTSA's investigations file, which try.vin imports once a day. The investigation types are described from the U.S. Department of Transportation Inspector General's May 2023 report on NHTSA's Office of Defects Investigation, NHTSA's petition rules (49 CFR Parts 552 and 557) and NHTSA's Office of Defects Investigation procedures. How try.vin reads NHTSA investigations.