NHTSA Office of Defects Investigation
Engineering Analysis EA20-002: Outboard Front Seat Belt Anchor Cable Failure
- Closed
NHTSA's Office of Defects Investigation opened Engineering Analysis EA20-002 on August 31, 2020, the day it closed Recall Query RQ19-003, which this investigation's summary cites, and closed it on August 30, 2024. NHTSA's investigations file lists 4 models from 4 makes for it and links recall 21V-245 to it.
Updated daily from NHTSA's investigations file
Key facts
- NHTSA number
- EA20-002 (also written EA20002)
- Investigation type
- Engineering Analysis A more detailed stage of a defect investigation, opened when NHTSA's Office of Defects Investigation decides an issue merits further review, often after a Preliminary Evaluation or a Recall Query; it can include vehicle testing, surveys and further information requests.
- Status
- Closed August 30, 2024
- Opened
- Closed
- Vehicle or equipment manufacturer
- General Motors, LLC
- Components
- Seat Belts; Seat Belts — Front; Seat Belts — Front — Anchorage
- Recall linked by NHTSA
- 21V-245: Driver's Seat Belt Tensioner Cable May Separate, reported
- Vehicles and equipment
- 4 models from 4 makes, including the Buick Enclave and Chevrolet Traverse
NHTSA's summary
As NHTSA's Office of Defects Investigation wrote it for Engineering Analysis EA20-002.
try.vin does not copy NHTSA's investigation documents; NHTSA's investigation record lists the ones NHTSA has published.
On August 31, 2020, the Office of Defects Investigations (ODI) opened Engineering Analysis (EA) EA20002, as an upgrade of Recall Query (RQ) RQ19003. This investigation, related to recall 14V-266, was opened to investigate instances of detachment of the flexible steel seat belt anchor cable attached to the outboard side of the front seats in vehicles manufactured by General Motors (GM). The subject vehicles included model year (MY) 2009 through 2014 GMC Acadia, Buick Enclave, and Chevrolet Traverse SUVs as well as MY 2009 through 2010 Saturn Outlook SUVs. These vehicles were previously repaired for this defect under recall 14V-266. The subject vehicle population is approximately 1.3 million vehicles. Special Coverage N192219480, issued in June 2019, addressed the subject defect in vehicles that previously received the recall remedy repair for subject recall 14V-266. The Special Coverage allows for component replacement for 12 years or 180,000 miles from the initial sale date, whichever comes first. Special Coverage N192219480 instructed service technicians to inspect the driver’s seat belt anchor cable for any damage to the protective sleeve and if damage was observed, the cable was replaced with a new sleeve as well as a new closeout piece that relocated the cable to mitigate the subject condition. In view of the Special Coverage conducted by General Motors, the high detectability of the subject failure, and the low rate of occurrence, this Engineering Analysis is closed. The closing of this investigation does not constitute a finding by NHTSA that a safety-related defect does not exist. The Agency reserves the right to take additional action if warranted by future circumstances. To review the ODI reports cited in the Closing Resume ODI Report Identification Number document, go to NHTSA.gov. Please see the attached document “EA20-002 Detailed Closing Summary” for more a detailed closing resume summary.
Vehicles and equipment listed for this investigation
NHTSA's investigations file lists these vehicles and equipment for Engineering Analysis EA20-002. A listed model year means only that an investigation names it; it says nothing about any particular vehicle. Model years with a try.vin recall page link to that page's NHTSA investigations section.
What an NHTSA investigation is
NHTSA's Office of Defects Investigation (ODI) looks into possible safety defects in vehicles and equipment, often after owner complaints. An investigation usually starts as a Preliminary Evaluation, or as a Recall Query when it concerns whether an existing recall covers the right vehicles or fixes the problem, and ODI can upgrade it to a more detailed Engineering Analysis. A Defect Petition asks NHTSA to open an investigation, and Audit and Equipment Queries are administrative investigations into whether companies complied with federal vehicle safety requirements, such as reporting, recall and certification rules.
An open investigation is not a finding that a safety defect exists, and NHTSA can close one without a recall.
To see whether a specific vehicle has an open recall, enter its VIN at nhtsa.gov/recalls.
Free VIN check: decode a VIN to see its year, make and model.
Sources
NHTSA's investigation record for EA20-002
Investigation details come from NHTSA's investigations file, which try.vin imports once a day. The investigation types are described from the U.S. Department of Transportation Inspector General's May 2023 report on NHTSA's Office of Defects Investigation, NHTSA's petition rules (49 CFR Parts 552 and 557) and NHTSA's Office of Defects Investigation procedures. How try.vin reads NHTSA investigations.