NHTSA vehicle safety data
2021 Altec Aerial Device Recalls & Complaints
The 2021 Altec Aerial Device has 22 NHTSA recall campaigns on file as of October 21, 2026. try.vin has no NHTSA owner complaints on file for the 2021 Altec Aerial Device. Recall repairs are usually free at an authorized Altec dealer.
NHTSA recall and complaint data for the 2021 Altec Aerial Device. Recall data is refreshed daily from NHTSA.
Cable Entry Step May Detach
NHTSA #25V562000 · Structure — Frame and Members · NHTSA notice
Reported August 29, 2025 · Altec Industries, Inc.
Potentially affected: 903 vehicles
Repair completion: 67.77% (latest rate the manufacturer reported to NHTSA; dataset updated October 21, 2026)
Altec campaign CSN-3246 · Owners notified October 24, 2025
Defect description
Altec Industries Inc. (Altec) is recalling certain 2011-2025 Aerial Device, Digger Derrick, and 2022-2025 Service Body vehicles. The cable step wire rope assembly may be improperly secured, which can allow the cable entry step to detach from the vehicle.
Safety consequence
A cable step that fails during use increases the risk of injury.
Manufacturer remedy
Altec will provide owners with instructions to inspect the cable crimps. If the cables are improperly crimped, Altec will provide instructions and a kit to replace the wire rope assemblies. Repairs will be performed free of charge. Owner notification letters were mailed October 24, 2025. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN-3246.
Damaged Cylinder Feeder Tube May Leak Oil
NHTSA #24V362000 · Equipment — Mechanical — Boom/Crane/Ladder · NHTSA notice
Reported May 23, 2024 · Altec Industries, Inc.
Potentially affected: 1,128 vehicles
Repair completion: 66.13% (latest rate the manufacturer reported to NHTSA; dataset updated October 21, 2026)
Altec campaign CSN 3159 · Owners notified July 19, 2024
Defect description
Altec Industries, Inc. (Altec) is recalling certain 2020-2024 Altec LR7 and LR8 aerial devices. The hydraulic cylinder feeder tube routed near the cylinder rest bracket may become damaged and leak oil, which can result in uncontrolled boom movement.
Safety consequence
Uncontrolled movement of the boom can increase the risk of injury.
Manufacturer remedy
Altec will replace the cylinder rest pad and the feeder tube if necessary, free of charge. Owner notification letters are expected to be mailed July 22, 2024. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN-3142.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Engine Compartment Fire from Short Circuit
NHTSA #24V015000 · Electrical System — 12V/24V/48V Battery — Cables · NHTSA notice
Reported January 11, 2024 · Altec Industries, Inc.
Potentially affected: 437 vehicles
Repair completion: 53.09% (latest rate the manufacturer reported to NHTSA; dataset updated October 21, 2026)
Altec campaign CSN-3142 · Owners notified March 8, 2024
Defect description
Altec Industries, Inc. (Altec) is recalling certain 2004-2023 AT Series aerial devices. The cables in the engine compartment may contact the vehicle's hood, damaging the cables and causing a short circuit.
Safety consequence
A short circuit increases the risk of a fire.
Manufacturer remedy
Altec will inspect and relocate the cables and fuse blocks, free of charge. Owner notification letters are expected to be mailed March 8, 2024. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN-3142.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Misaligned Welder May Detach from Vehicle
NHTSA #23V824000 · Structure — Body · NHTSA notice
Reported December 7, 2023 · Altec Industries, Inc.
Potentially affected: 43 vehicles
Repair completion: 86.05% (latest rate the manufacturer reported to NHTSA; dataset updated October 21, 2026)
Altec campaign CSN 3133 · Owners notified February 1, 2024
Defect description
Altec Industries, Inc. (Altec) is recalling certain 2021-2023 CB5-132D-S vehicles equipped with a Bobcat 260 welder installed on a track system. The welder may be misaligned, preventing the mounting fasteners from being properly tightened.
Safety consequence
Loose fasteners can allow the welder to detach from the vehicle, becoming a road hazard and increasing the risk of a crash.
Manufacturer remedy
Altec will align the welder and tighten the fasteners, free of charge. Owner notification letters were mailed February 01, 2024. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN 3133.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Boom Tip Outlet May Be Missing GFCI Protection
NHTSA #23V438000 · Electrical System · NHTSA notice
Reported June 22, 2023 · Altec Industries, Inc.
Potentially affected: 18 vehicles
Repair completion: 61.11% (latest rate the manufacturer reported to NHTSA; dataset updated October 21, 2026)
Altec campaign CSN 3091 · Owners notified August 25, 2023
Defect description
Altec Industries, Inc. (Altec) is recalling certain 2019-2022 AT335 vehicles. An inverter-powered outlet may have been installed at the aerial boom tip without ground-fault interrupter (GFCI) protection.
Safety consequence
An outlet without GFCI protection may fail to shut off electrical power when a ground-fault occurs, increasing the risk of injury or fire.
Manufacturer remedy
Dealers will inspect and install a GFCI outlet as necessary, free of charge. Owner notification letters are expected to be mailed August 25, 2023. Owners may contact Altec's customer service at 1-877-462-5832. Altec's number for this recall is CSN 3091.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Collision Mitigation Software Malfunction
NHTSA #23V395000 · Forward Collision Avoidance — Automatic Emergency Braking · NHTSA notice
Reported June 1, 2023 · Altec Industries, Inc.
Potentially affected: 59 vehicles
Repair completion: 94.92% (latest rate the manufacturer reported to NHTSA; dataset updated October 21, 2026)
Altec campaign CSN 3085 · Owners notified July 28, 2023
Defect description
Altec Industries, Inc. (Altec) is recalling certain 2020-2023 D4000B, D2000B, and AC18 trucks. The collision mitigation system software may not be calibrated correctly, prohibiting the active braking system from activating.
Safety consequence
An active braking system that fails to activate as intended increases the risk of a crash.
Manufacturer remedy
Owners will be notified to take their vehicles to their respective OEM service center for a software update and road-test, free of charge. Owner notification letters are expected to be mailed July 28, 2023. Owners may contact Altec's customer service at 1-877-468-5832. Altec's number for this recall is CSN 3085.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Strobe Lights May Short and Cause Fire
NHTSA #23V357000 · Equipment — Emergency — Siren/Lighting/Strobes · NHTSA notice
Reported May 18, 2023 · Altec Industries, Inc.
Potentially affected: 5,431 vehicles
Repair completion: 82.08% (latest rate the manufacturer reported to NHTSA; dataset updated October 21, 2026)
Altec campaign CSN 3079 · Owners notified July 14, 2023
Defect description
Altec Industries, Inc. (Altec) is recalling certain 2021-2023 Aerial Devices, Digger Derricks, Service Bodies and Cranes. Water can leak into the strobe lights, which could cause an electrical short-circuit.
Safety consequence
An electrical short-circuit can increase the risk of a fire.
Manufacturer remedy
Altec will provide instructions to inspect the light assembly for moisture and install a new fuse. If moisture is found or the light is inoperative, a light replacement kit will be installed. Repairs will be performed free of charge. Owner notification letters are expected to be mailed July 14, 2023. Owners may contact Altec's customer service at 1-877-462-5832. Altec's number for this recall is CSN 3079.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Missing Weld On Rear Pole Rack
NHTSA #23V216000 · Structure — Body · NHTSA notice
Reported March 30, 2023 · Altec Industries, Inc.
Potentially affected: 1,967 vehicles
Repair completion: 72.7% (latest rate the manufacturer reported to NHTSA; dataset updated October 21, 2026)
Altec campaign CSN 3064 · Owners notified May 26, 2023
Defect description
Altec Industries, Inc. (Altec) is recalling certain 2016-2022 DM, DH, DC, DL, D2000, D3000, and D4000 series digger derricks, and AM55 aerial devices. The base of the rear pole rack may be missing a weld.
Safety consequence
A missing weld on the rear pole rack can lead to a crack that could cause the pole and rack to drop in height, increasing the risk of an injury.
Manufacturer remedy
Altec will inspect the rear pole rack mounting plate, and if necessary, replace any required welds, free of charge. Owner notification letters are expected to be mailed May 26, 2023. Owners may contact Altec's customer service at 1-877-462-5832. Altec's number for this recall is CSN 3064.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Jib Winch May be Operated without Outriggers Set
NHTSA #22V794000 · Equipment — Mechanical — Boom/Crane/Ladder · NHTSA notice
Reported October 21, 2022 · Altec Industries, Inc.
Potentially affected: 71 vehicles
Repair completion: 100% (latest rate the manufacturer reported to NHTSA; dataset updated October 21, 2026)
Altec campaign CSN 3030 · Owners notified December 16, 2022
Defect description
Altec Industries, Inc. (Altec) is recalling certain 2019-2022 AT41ME aerial devices. The material handling interlocking valve may lose power when the outriggers are not set, allowing the jib winch to be operated while the outriggers are up.
Safety consequence
Outriggers that are not set when loads are being lifted by the jib winch may cause the unit to tip, increasing the risk of injury.
Manufacturer remedy
Altec will install a visual indication system to show when the outriggers are set or not set, and provide a new pre-operational inspection placard, free of charge. Owner notification letters are expected to be mailed December 16, 2022. Owners may contact Altec's customer service at 1-877-462-5832. Altec's number for this recall is CSN 3030.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Boom Weld May Crack
NHTSA #22V613000 · Equipment — Mechanical — Boom/Crane/Ladder · NHTSA notice
Reported August 10, 2022 · Altec Industries, Inc.
Potentially affected: 975 vehicles
Repair completion: 78.97% (latest rate the manufacturer reported to NHTSA; dataset updated October 21, 2026)
Altec campaign CSN-3017 · Owners notified October 7, 2022
Defect description
Altec Industries, Inc. (Altec) is recalling certain 2015-2022 DT65 and DT85 Aerial Devices. The weld between the base boom and the auger stow bracket could crack.
Safety consequence
A cracked weld may allow the auger bracket to detach from the boom, increasing the risk of injury.
Manufacturer remedy
Altec will inspect and repair cracks found in the base boom, free of charge. Owner notification letters were mailed October 7, 2022. Owners may contact Altec's customer service at 1-877-462-5832. Altec's number for this recall is CSN-3017.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Engine Stall from Blown Ignition Circuit Fuse
NHTSA #22V577000 · Electrical System — Wiring — Fuses and Circuit Breakers · NHTSA notice
Reported August 4, 2022 · Altec Industries, Inc.
Potentially affected: 594 vehicles
Repair completion: 87.37% (latest rate the manufacturer reported to NHTSA; dataset updated October 21, 2026)
Altec campaign CSN 3015; CSN 3097 · Owners notified September 30, 2022
Defect description
Altec Industries, Inc. (Altec) is recalling certain 2017-2021 Altec AT200A, AT235, AT235P, AT237, AT37G, AT40G, AT41M, and CB5-132D-S aerial devices. A wire to the boom stow sensor may be routed over a sharp edge, which can expose the wire to metal and result in a blown ignition circuit fuse.
Safety consequence
A blown fuse can cause an engine stall, increasing the risk of a crash.
Manufacturer remedy
Altec will install a relay, free of charge. Owner notification letters are expected to be mailed September 30, 2022. Owners may contact Altec's customer service at 1-877-462-5832. Altec's number for this recall is CSN 3015.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Chassis Fuel Line Clamps Not Properly Secured
NHTSA #22V147000 · Fuel System, Diesel — Delivery — Hoses, Lines/Piping, and Fittings · NHTSA notice
Reported March 11, 2022 · Altec Industries, Inc.
Potentially affected: 27,270 vehicles
Repair completion: 76.27% (latest rate the manufacturer reported to NHTSA; dataset updated October 21, 2026)
Altec campaign CSN 855 · Owners notified May 6, 2022
Defect description
Altec Industries, Inc. (Altec) is recalling certain 2016-2021 AT and TA aerial devices. The chassis fuel line clamps may not have been secured properly after they were removed to install an aftermarket accessory.
Safety consequence
Unsecured fuel lines may become damaged and leak fuel, increasing the risk of a fire.
Manufacturer remedy
Altec will provide work instructions and a kit to properly secure the fuel line, and repair any damaged fuel line if necessary, free of charge. Owner notification letters were mailed on May 6, 2022. Owners may contact Altec's customer service at 1-877-462-5832. Altec's number for this recall is CSN 855.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Missing Carbon Monoxide Detectors
NHTSA #22V146000 · Equipment · NHTSA notice
Reported March 11, 2022 · Altec Industries, Inc.
Potentially affected: 46 vehicles
Repair completion: 2.17% (latest rate the manufacturer reported to NHTSA; dataset updated October 21, 2026)
Altec campaign CSN 854 · Owners notified May 6, 2022
Defect description
Altec Industries, Inc. (Altec) is recalling certain 2017-2021 SK185-MP, and SKC landscaping spray vans. The vehicles are not equipped with carbon monoxide detectors.
Safety consequence
Elevated levels of carbon monoxide gas may not be detected, increasing the risk of injury.
Manufacturer remedy
Altec will install a carbon monoxide detector and safety alert placard, free of charge. Owner notification letters were mailed on May 6, 2022. Owners may contact Altec's customer service at 1-877-462-5832. Altec's number for this recall is CSN 864.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Shear Plates May Fail
NHTSA #22V071000 · Equipment — Mechanical — Boom/Crane/Ladder · NHTSA notice
Reported February 9, 2022 · Altec Industries, Inc.
Potentially affected: 167 vehicles
Repair completion: 64.07% (latest rate the manufacturer reported to NHTSA; dataset updated October 21, 2026)
Altec campaign CSN 851 · Owners notified April 8, 2022
Defect description
Altec Industries, Inc. (Altec) is recalling certain 2018-2021 DC and DM Series Digger Derricks and AM series Aerial Devices. The unit subbase may develop cracks in the bulkhead plate, which can cause the shear plates to fail.
Safety consequence
Shear plate failure can result in the separation of the subbase and truck frame, increasing the risk of injury.
Manufacturer remedy
Altec will inspect the bulkhead plate, and add a reinforcement plate, free of charge. Owner notification letters were mailed on April 8, 2022. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN 851.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Over-Tightened Bolts in Rotation Bearing
NHTSA #22V072000 · Structure — Critical Fasteners · NHTSA notice
Reported February 9, 2022 · Altec Industries, Inc.
Potentially affected: 454 vehicles
Repair completion: 95.59% (latest rate the manufacturer reported to NHTSA; dataset updated October 21, 2026)
Altec campaign CSN 849 · Owners notified March 25, 2022
Defect description
Altec Industries, Inc. (Altec) is recalling certain 2019-2021 ATTXX-M/P/S aerial devices. Bolts in the rotation bearing outer-race may have been over-tightened, allowing the bolts to break.
Safety consequence
Broken bolts can cause separation of the pedestal and turntable, increasing the risk of injury.
Manufacturer remedy
Altec will replace the outer-race rotation bolts, free of charge. Owner notification were mailed on March 25, 2022. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN 849.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Bolt Failure May Cause Pedestal Separation
NHTSA #22V058000 · Equipment — Mechanical — Boom/Crane/Ladder — Turntable · NHTSA notice
Reported February 3, 2022 · Altec Industries, Inc.
Potentially affected: 157 vehicles
Repair completion: 91.72% (latest rate the manufacturer reported to NHTSA; dataset updated October 21, 2026)
Altec campaign CSN 846 · Owners notified April 4, 2022
Defect description
Altec Industries, Inc. (Altec) is recalling certain 2017-2021 LS60 aerial devices. The outer-race rotation bearing bolt washers may interfere with an adjacent pedestal weld, which could cause the rotation bearing bolts to break.
Safety consequence
Broken bolts can cause the pedestal to separate from the turntable, increasing the risk of injury.
Manufacturer remedy
Altec will inspect the outer rotation bolt washers and repair the pedestal as necessary, free of charge. Owner notification letters were mailed on April 4, 2022. Owners may contact Altec's customer service at 1-877-462-5832. Altec's number for this recall is CSN 846.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Boom May Move in an Unintended Direction
NHTSA #22V060000 · Equipment — Mechanical — Boom/Crane/Ladder · NHTSA notice
Reported February 3, 2022 · Altec Industries, Inc.
Potentially affected: 47 vehicles
Repair completion: 95.74% (latest rate the manufacturer reported to NHTSA; dataset updated October 21, 2026)
Altec campaign CSN 847 · Owners notified March 16, 2022
Defect description
Altec Industries, Inc. (Altec) is recalling certain 2021 AH125 aerial devices. When operating the boom positioning control lever, a defective linear potentiometer may cause the boom to move in an unintended direction.
Safety consequence
The boom moving in an unintended direction increases the risk of injury.
Manufacturer remedy
Altec will inspect the linear potentiometer manufacturer date, and replace the potentiometer if necessary, free of charge. Owner notification letters were mailed on March 16, 2022. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN 847.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Incorrect Hydraulic Plumbing to Lift Cylinders
NHTSA #21V998000 · Equipment — Mechanical — Boom/Crane/Ladder — Motor/Hydraulic Pump · NHTSA notice
Reported December 20, 2021 · Altec Industries, Inc.
Potentially affected: 150 vehicles
Repair completion: 79.33% (latest rate the manufacturer reported to NHTSA; dataset updated October 21, 2026)
Altec campaign CSN 842 · Owners notified February 18, 2022
Defect description
Altec Industries, Inc. (Altec) is recalling certain 2017-2021 AN67-E100, AA67-E100, AN67, AA67, and AN55-E88 aerial devices. The hydraulic plumbing to the lift cylinders of the lower and upper booms could be connected incorrectly, allowing the boom to overextend.
Safety consequence
The operator could overextend the boom while using the material handling jib, causing the aerial device to tip over and increasing the risk of injury.
Manufacturer remedy
Altec will inspect and correct the plumbing as necessary, free of charge. Owner notification letters are expected to be mailed February 18, 2022. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN 842.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Bolt Failure May Cause Pedestal Separation
NHTSA #21V722000 · Equipment — Mechanical — Boom/Crane/Ladder — Turntable · NHTSA notice
Reported September 16, 2021 · Altec Industries, Inc.
Potentially affected: 94 vehicles
Repair completion: 80.85% (latest rate the manufacturer reported to NHTSA; dataset updated October 21, 2026)
Altec campaign CSN 833 · Owners notified November 15, 2021
Defect description
Altec Industries, Inc. (Altec) is recalling certain 2016-2021 LS87 aerial devices. The outer-race rotation bearing bolt washers may interfere with an adjacent pedestal weld, which could cause the rotation bearing bolts to break.
Safety consequence
Broken bolts can cause the pedestal to separate from the turntable, increasing the risk of injury.
Manufacturer remedy
Altec will inspect the outer rotation bolt washers and repair the pedestal as necessary, free of charge. Owner notification letters were mailed on November 15, 2021. Owners may contact Altec's customer service at 1-877-462-5832. Altec's number for this recall is CSN 833.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Cylinder Rod Threads Not Machined Properly
NHTSA #21V709000 · Equipment · NHTSA notice
Reported September 13, 2021 · Altec Industries, Inc.
Potentially affected: 29 vehicles
Repair completion: 100% (latest rate the manufacturer reported to NHTSA; dataset updated October 21, 2026)
Altec campaign MAB 834 · Owners notified September 30, 2021
Defect description
Altec Industries, Inc. (Altec) is recalling certain 2021 AM50, 55, and 60E aerial devices. The cylinder rod threads may not have been machined properly, which could result in uncontrollable boom movement.
Safety consequence
Uncontrollable boom movement increases the risk of injury.
Manufacturer remedy
Altec will replace the cylinder, free of charge. Owner notification letters were mailed on September 30, 2021. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is MAB 834.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Incorrect Bolts Installed on Aerial Pedestal
NHTSA #21V464000 · Equipment · NHTSA notice
Reported June 18, 2021 · Altec Industries, Inc.
Potentially affected: 218 vehicles
Repair completion: 95.41% (latest rate the manufacturer reported to NHTSA; dataset updated October 21, 2026)
Altec campaign CSN 825 · Owners notified July 22, 2021
Defect description
Altec Industries, Inc. (Altec) is recalling certain 2020-2021 AT200A, AT235, AT235P Aerial Devices. Bolts of insufficient strength may have been used to connect the pedestal and sub-base, which could cause the bolts to become overloaded.
Safety consequence
Overloaded bolts can fail, causing the pedestal to separate and increasing the risk of injury or death.
Manufacturer remedy
Altec will issue remedy instructions to owners, to inspect the bolts, and replace any grade 5 bolts with grade 8 bolts, free of charge. Owner notification letters were mailed on July 22, 2021. Owners may contact Altec customer service at 1-800-462-5832. Altec's number for this recall is CSN 825.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Unintended Movement of the Lower and Upper Booms
NHTSA #21V409000 · Equipment Adaptive/Mobility · NHTSA notice
Reported June 1, 2021 · Altec Industries, Inc.
Potentially affected: 1,977 vehicles
Repair completion: 64.04% (latest rate the manufacturer reported to NHTSA; dataset updated October 21, 2026)
Altec campaign CSN 823 · Owners notified July 28, 2021
Defect description
Altec Industries, Inc. (Altec) is recalling certain 2005-2021 A65, A70, A75, A72-T, A77-T, and A82-T vehicles. The lower and upper boom raise spools can shift after releasing the joystick or control interlock.
Safety consequence
Unintended movement of the lower and upper booms increases the risk of injury.
Manufacturer remedy
Altec will install a jumper hose and check valve into the boomtip tank lines and replace the overcenter blocking cartridge with an internally referenced drain path, free of charge. Owner notification letters were mailed on July 28, 2021. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN 823.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Other Altec Aerial Device model years
Check your 2021 Altec Aerial Device VIN
Not every recall applies to every VIN in a given year. Enter the 17-character VIN from your Altec Aerial Device at nhtsa.gov/recalls to see whether your specific vehicle has an unrepaired recall.
Check an Altec VIN