NHTSA vehicle safety data
2015 Vermeer TG5000 Recalls, Ratings & Complaints
The 2015 Vermeer TG5000 has 3 NHTSA recall campaigns and 0 owner complaints on file as of October 16, 2026. Recall repairs are usually free at an authorized Vermeer dealer.
NHTSA recall and complaint data for the 2015 Vermeer TG5000. Recall data is refreshed daily from NHTSA.
PARKING BRAKE
NHTSA #16V486000Reported June 27, 2016 · Vermeer Manufacturing Company
Potentially affected: 254 vehicles
Defect description
Vermeer Manufacturing Company (Vermeer) is recalling certain model year 2014-2016 DT6, HG4000, HC6000, HG8000, TG5000, TG7000 and WC2300XL, 2014-2015 TG9000 and 2015-2016 WC2500XL trailers, equipped with certain Bendix SR5 spring brake valves. These valves may have been improperly machined which may cause a delay of application of the spring brakes while parking.
Safety consequence
If there is a delay of the spring brake application, the trailer may roll away after it has decoupled from the tractor, increasing the risk of a crash or injury.
Manufacturer remedy
Vermeer will contact owners and provide a remedy kit, complete with instructions, to repair any affected SR-5 trailer relay valves, free of charge. Vermeer issued an interim notification to owners on August 19, 2016. The recall began on October 14, 2016. Owners may contact Vermeer Customer Service Department at 1-641-628-3141. Vermeer's number for this recall is IK3350.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
PARKING BRAKE:CONVENTIONAL:AIR
NHTSA #16V427000Reported June 13, 2016 · Vermeer Manufacturing Company
Potentially affected: 11 vehicles
Defect description
Vermeer Manufacturing Company (Vermeer) is recalling certain model year 2014-2016 TG5000 vehicles manufactured November 23, 2013, to May 23, 2016. The assembly instruction manual for these vehicles called for the wrong slack adjuster pushrod length to be used, and as a result, the pushrod threads may fail, causing the trailer parking brakes to unintentionally engage.
Safety consequence
If the trailer brakes unintentionally engage it would increase the risk of a crash.
Manufacturer remedy
Vermeer will notify owners, and dealers will reset the air brake pushrod length to the correct dimension, free of charge. The recall began on August 4, 2016. Owners may contact Vermeer customer service at 1-641-628-3141. Vermeer's number for this recall is IK3334.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
TRAILER HITCHES:FIFTH WHEEL ASSEMBLY
NHTSA #16V425000Reported June 10, 2016 · Vermeer Manufacturing Company
Potentially affected: 11 vehicles
Defect description
Vermeer Manufacturing Company (Vermeer) is recalling certain 2014-2016 TG5000 Tub Grinder trailers manufactured November 23, 2013, to May 23, 2016. The spherical washers used during the assembly of the kingpin may have been installed incorrectly, possibly causing the attaching bolts to fail and therefore the kingpin to detach.
Safety consequence
If the kingpin does not remain properly connected to the trailer, the trailer may detach from the vehicle, increasing the risk of a crash.
Manufacturer remedy
Vermeer will notify owners, and dealers will inspect and repair the installation of the spherical washers, as necessary, free of charge. The recall began on August 4, 2016. Owners may contact Vermeer customer service at 1-641-628-3141.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Other Vermeer TG5000 model years
Check your 2015 Vermeer TG5000 VIN
Not every recall applies to every VIN in a given year. Enter the 17-character VIN from your Vermeer TG5000 at nhtsa.gov/recalls to see whether your specific vehicle has an unrepaired recall.
Check a Vermeer VIN