NHTSA vehicle safety data
2010 Terex Digger Derrick Recalls, Ratings & Complaints
The 2010 Terex Digger Derrick has 3 NHTSA recall campaigns and 0 owner complaints on file as of October 16, 2026. Recall repairs are usually free at an authorized Terex dealer.
NHTSA recall and complaint data for the 2010 Terex Digger Derrick. Recall data is refreshed daily from NHTSA.
EQUIPMENT
NHTSA #17V320000Reported May 15, 2017 · Terex South Dakota, Inc.
Potentially affected: 58 vehicles
Defect description
Terex South Dakota (TSD) is recalling certain 2007-2016 vehicles equipped with Terex C4000, FC, HR, HRX, SCM, TC, TCX, TL, TPL, and XT aerial devices and digger derricks used for utility line work. In the event of a short circuit of a tool plugged into the onboard electrical socket, the GFPE breaker may not trip at the proper current before the user receives a shock.
Safety consequence
Without proper protection against electrical shock, the user has a greater risk of injury.
Manufacturer remedy
TSD will notify owners, and dealers will replace the breakers with GFCI breakers that will trip at a lower current, free of charge. The recall began on June 27, 2017. Owners may contact TSD Customer Service Department at 1-800-982-8975. TSD's number for this recall is SN658.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
EQUIPMENT
NHTSA #13V089000Reported March 7, 2013 · Terex South Dakota, Inc.
Potentially affected: 261 vehicles
Defect description
Terex South Dakota, Inc. (Terex) is recalling certain model year 1999-2012 XL4000 Digger Derrick utility trucks. The shims and spacers used to adjust the length of the hydraulic cylinder may give, causing the rod eye and threads to fatigue while lifting loads.
Safety consequence
The hydraulic cylinder may separate from the digger derick arm, allowing it to collapse without warning, increasing the risk of injury to the operator or those nearby.
Manufacturer remedy
Terex will notify owners, and dealers will inspect and replace the rod eye and threads, as necessary. The existing shims and spacer will be replaced with a hardened spacer. All repairs will be made at no charge to the owner. The recall began on May 23, 2013. Owners may contact Terex at 1-605-882-4000.
Notes
Terex's recall campaign number is SN602.Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
EQUIPMENT
NHTSA #11V048000Reported January 20, 2011 · TEREX UTILITIES SOUTH, INC.
Potentially affected: 254 vehicles
Defect description
TEREX IS RECALLING CERTAIN MODEL YEAR 2008-2010 AERIAL DEVICE AND DIGGER DERRICK UTILITY VEHICLES MANUFACTURED FROM JUNE, 2008 THROUGH NOVEMBER, 2010. THE LANYARD ANCHORS WERE NOT HEAT TREATED PROPERLY AND MAY FRACTURE.
Safety consequence
FAILURE OF THE LANYARD ANCHOR COULD OCCUR INCREASING THE RISK OF PERSONAL INJURIES OR DEATH.
Manufacturer remedy
DEALERS WILL REPLACE THE LANYARD ANCHORS WITH A NEW PART FREE OF CHARGE. THE SAFETY RECALL BEGAN ON FEBRUARY 11, 2011. OWNERS MAY CONTACT TEREX AT 1-605-884-3892.
Notes
TEREX SAFETY RECALL NO. CB593.OWNERS MAY ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY 1-800-424-9153), OR GO TO <A HREF=HTTP://WWW.SAFERCAR.GOV>HTTP://WWW.SAFERCAR.GOV</A> .
Other Terex Digger Derrick model years
Check your 2010 Terex Digger Derrick VIN
Not every recall applies to every VIN in a given year. Enter the 17-character VIN from your Terex Digger Derrick at nhtsa.gov/recalls to see whether your specific vehicle has an unrepaired recall.
Check a Terex VIN