NHTSA vehicle safety data
2020 Peterbilt 367 Recalls, Ratings & Complaints
The 2020 Peterbilt 367 has 4 NHTSA recall campaigns and 0 owner complaints on file as of October 16, 2026. Recall repairs are usually free at an authorized Peterbilt dealer.
NHTSA recall and complaint data for the 2020 Peterbilt 367. Recall data is refreshed daily from NHTSA.
STEERING:CRITICAL FASTENERS
NHTSA #22V277000Reported April 25, 2022 · PACCAR Incorporated
Potentially affected: 17,641 vehicles
Defect description
PACCAR Incorporated (PACCAR) is recalling certain 2018-2020 Kenworth T270, T370, T440, T470, T660, T680, T880, T800, W900, W990; and 2018-2020 Peterbilt 330, 337, 348, 365, 367, 389, 520, 567, and 579 vehicles. The Dana D-Series axle steer arm fasteners that attach the steering arm to the steering knuckle may fail.
Safety consequence
Fastener failure can result in a loss of steering control, increasing the risk of a crash or injury.
Manufacturer remedy
Dealers will replace and torque the steer arm fasteners, at no charge. Owner notification letters were mailed November 8, 2022. Owners may contact Kenworth customer service at 1-425-828-5888 and Peterbilt customer service at 1-940-591-4220. PACCAR's numbers for this recall are 22 PBB and 22 KWB.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
FUEL SYSTEM, DIESEL:FUEL INJECTION SYSTEM:FUEL RAIL
NHTSA #21V391000Reported May 26, 2021 · PACCAR Incorporated
Potentially affected: 612 vehicles
Defect description
PACCAR Incorporated (PACCAR) is recalling certain 2018-2021 Peterbilt 337, 348, 365, 367, 520, 567, Kenworth T270, T370, T440, T470, T800 and T880 vehicles. The sealing washer may not seat correctly in the pilot bore holes, allowing the high pressure fuel rail assembly to leak.
Safety consequence
A fuel leak in the presence of an ignition source increases the risk of a fire.
Manufacturer remedy
Dealers will inspect the rail threads and fuel lines, and replace the rail as necessary, free of charge. Owners may contact PACCAR customer service at 1-425-828-5888 (Kenworth) or 1-940-591-4220 (Peterbilt). PACCAR's numbers for this recall are 21KWC and 21PBD.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
POWER TRAIN:AXLE ASSEMBLY
NHTSA #20V506000Reported August 26, 2020 · PACCAR Incorporated
Potentially affected: 1,097 vehicles
Defect description
PACCAR Incorporated (PACCAR) is recalling certain 2020-2021 Peterbilt 348, 365, 367, 389, 520, 567 and Kenworth T800, T880, W900, W990 vehicles equipped with Watson and Chalin steerable lift axle suspension systems (model SL2065). The axles may have lower rear pivot bolts that are not long enough to sufficiently engage the locking feature of the corresponding nuts.
Safety consequence
The short screws can cause the hardware to separate from the suspension system and become road hazards, increasing the risk of a crash and/or injury.
Manufacturer remedy
PACCAR will notify owners, and dealers will inspect suspect chassis and replace the pivot bolts, as necessary, free of charge. The recall began September 29, 2020. Owners may contact Kenworth customer service at 1-425-828-5888 and Peterbilt customer service at 1-940-591-4220. PACCAR's numbers for this recall is 20PBE and 20KWC.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
POWER TRAIN:AXLE ASSEMBLY:AXLE SHAFT
NHTSA #19V911000Reported December 19, 2019 · PACCAR Incorporated
Potentially affected: 148 vehicles
Defect description
PACCAR Incorporated (PACCAR) is recalling certain 2020 Kenworth T800, T880 and W990 and Peterbilt 348, 367, 389, 520, and 567 vehicles. The forward rear axle output shafts may have been improperly heat treated during manufacturing, possibly resulting in the shafts fracturing.
Safety consequence
If the rear axle output shaft fractures, the shaft or interaxle driveline could detach and become a road hazard, increasing the risk of a crash.
Manufacturer remedy
PACCAR will notify owners, and dealers will inspect and replace the output shafts, as necessary, free of charge. The recall began February 19, 2020. Owners may contact Kenworth customer service at 1-425-828-5888 or Peterbilt customer service at 1-940-591-4220. PACCAR's numbers for this recall are 19KWE and 19PBG.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Other Peterbilt 367 model years
Check your 2020 Peterbilt 367 VIN
Not every recall applies to every VIN in a given year. Enter the 17-character VIN from your Peterbilt 367 at nhtsa.gov/recalls to see whether your specific vehicle has an unrepaired recall.
Check a Peterbilt VIN