NHTSA vehicle safety data

2013 Isuzu Reach Recalls, Ratings & Complaints

The 2013 Isuzu Reach has 4 NHTSA recall campaigns and 0 owner complaints on file as of October 16, 2026. Recall repairs are usually free at an authorized Isuzu dealer.

NHTSA recall and complaint data for the 2013 Isuzu Reach. Recall data is refreshed daily from NHTSA.

POWER TRAIN:DRIVELINE:DRIVESHAFT

NHTSA #19V098000

Reported February 21, 2019 · XL Hybrids INC

Potentially affected: 94 vehicles

Defect description

XL Hybrids Inc. (XL) is recalling certain 2013-2018 Isuzu Reach vehicles modified to be equipped with XL's electric hybrid system. The cardan (universal) joint on the front driveshaft may fail, possibly causing the front driveshaft to detach.

Safety consequence

If the front driveshaft detaches from the vehicle, drive power will be lost, increasing the risk of a crash. The detached driveshaft may also create a road hazard, increasing the risk of a crash for following traffic.

Manufacturer remedy

XL will notify owners, and dealers will replace the front driveshaft with an updated one, free of charge. The manufacturer has not yet provided a notification schedule. Owners may contact XL customer service at 1-866-414-3212.

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

POWER TRAIN:AXLE HUBS

NHTSA #17V191000

Reported March 21, 2017 · Isuzu Technical Center of America, Inc.

Potentially affected: 97,000 vehicles

Defect description

Isuzu Technical Center of America, Inc. (Isuzu) is recalling certain 2011-2016 NPR, 2011-2017 NPR-HD, NQR, NRR, 2015-2017 NPR-XD, 2012-2016 Reach, NPR Gas and NPR-HD Gas incomplete trucks. The left rear wheel bearing hub locking bolts may not have been properly tightened during assembly.

Safety consequence

The loose bolts can allow the wheel assembly to move outward from the axle housing, affecting the control of the vehicle and reducing braking performance, thereby increasing a risk of a crash.

Manufacturer remedy

Isuzu will notify owners, and dealers will inspect the left rear wheel bearing hub locking bolts, tightening them as necessary, free of charge. The recall began on April 19, 2017. Owners may contact Isuzu customer service at 1-866-441-9638.

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

EXTERIOR LIGHTING:BRAKE LIGHTS:SWITCH

NHTSA #14V735000

Reported November 18, 2014 · Isuzu Manufacturing Services of America

Potentially affected: 3,564 vehicles

Defect description

Isuzu Manufacturing Services of America (Isuzu) is recalling certain model year 2012-2014 Reach chassis manufactured July 26, 2011, to August 7, 2014. In the affected vehicles, the brake light switch may be bent while braking, possibly causing it to not activate the brake lights and potentially corrode.

Safety consequence

If the brake light switch bends or corrodes, the brake light switch may become inoperative, increasing the risk of a crash.

Manufacturer remedy

Isuzu will notify owners, and dealers will apply a protector and a waterproof cover with an extension harness so that the switch cannot be bent or corroded, free of charge. Parts are not currently available. Owners will be sent an interim notification and then will be sent a second notice when remedy parts are available. Isuzu issued an interim notification to owners on December 17, 2014. The manufacturer has not yet provided a notification schedule. Owners may contact Isuzu customer service at 1-866-441-9638.

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

ELECTRICAL SYSTEM:HORN

NHTSA #14V203000

Reported April 17, 2014 · Isuzu Manufacturing Services of America

Potentially affected: 1,770 vehicles

Defect description

Isuzu Manufacturing Services of America, Inc. (Isuzu) is recalling certain model year 2012-2013 Reach stripped chassis manufactured July 26, 2011, through August 27, 2013. The horn switch contacts may be bent or may wear prematurely causing the horn not to work.

Safety consequence

An inoperable horn may increase the risk of a crash.

Manufacturer remedy

Isuzu will notify owners, and dealers will inspect the horn contact shaft to see if it is bent or if it has premature wear, and replace the steering wheel combination switch if either condition is found, free of charge. Owners may contact Isuzu customer service at 1-866-441-9638. Isuzu's number for this recall is CB14-N-001.

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

Other Isuzu Reach model years

Check your 2013 Isuzu Reach VIN

Not every recall applies to every VIN in a given year. Enter the 17-character VIN from your Isuzu Reach at nhtsa.gov/recalls to see whether your specific vehicle has an unrepaired recall.

Check an Isuzu VIN