NHTSA Office of Defects Investigation
Preliminary Evaluation PE16-010: Electronic Parking Brake
- Closed
NHTSA's Office of Defects Investigation opened Preliminary Evaluation PE16-010 on September 3, 2016 and closed it on February 22, 2017. NHTSA's investigations file lists the 2016 Hyundai Sonata for it.
Updated daily from NHTSA's investigations file
Key facts
- NHTSA number
- PE16-010 (also written PE16010)
- Investigation type
- Preliminary Evaluation The first stage of most defect investigations: NHTSA's Office of Defects Investigation gathers basic information about a possible safety defect, including from the manufacturer.
- Status
- Closed February 22, 2017
- Opened
- Closed
- Vehicle or equipment manufacturer
- Hyundai Motor America
- Components
- Service Brakes; Service Brakes, Hydraulic; Service Brakes, Hydraulic — Foundation Components — Disc — Pads
- Vehicles and equipment
- 2016 Hyundai Sonata
A recall appears here only when NHTSA's investigations file links one to the investigation; NHTSA's summary or record can name others.
NHTSA's summary
As NHTSA's Office of Defects Investigation wrote it for Preliminary Evaluation PE16-010.
The Office of Defects Investigation opened this investigation on September 3, 2016 based on four reports alleging the rear brakes locked or applied while driving without brake pedal application. One of the reports alleged a fire in the right rear wheel area.
The vehicles subject to the investigation are equipped with an optional Electronic Parking Brake (EPB). In this system, an electric motor applies the parking brake by moving the rear brake pads (pads) against the brake rotors (rotors) when activated by the EPB control switch. The EPB is released by the control switch or by selecting a drive gear with the transmission shifter when the ignition is on.
If the EPB has not been used within 1000 kilometers (621 miles) the system is designed to perform an Automatic Adjustment Function (AAF) of the pads to check for proper clearance. This function is a pad adjustment only and is preformed with the vehicle in park with the ignition off. It does not set the parking brake or turn the brake indicator light on. Hyundai has identified an error within the EPB control logic that can cause the pads to remain in contact with the rotors at various levels of force after the AAF is completed. This condition could cause the rear brakes to drag at the next drive cycle and may generate some levels of heat and smoke. The EPB control logic error affects model year 2016 vehicles produced from the start of production through March 16, 2016.
Vehicles produced from March 17, 2016 incorporate an updated EPB control logic to prevent brake pad drag. On May 11, 2016 Hyundai notified its dealer network of Service Campaign TFF to update the EPB control logic in the affected vehicle population. Dealers will reflash the EPB software to prevent brake pad drag.
There are no reports of accidents or injuries as a result of this issue. The incident that alleged fire could not be confirmed as there were no repairs to the vehicle other than replacement of the rear brake rotors and pads.
ODI is closing this investigation based on the manufacturer's Service Campaign of the affected vehicles and in consideration that the the effect of brake drag in this instance does not appear to present an unreasonable risk to motor vehicle safety. The ODI reports cited above can be viewed at www-odi.nhtsa/complaints under the following identification (ODI)numbers: 10820359, 10854476, 10875764, 10892736, and 10928478
Vehicles and equipment listed for this investigation
NHTSA's investigations file lists these vehicles and equipment for Preliminary Evaluation PE16-010. A listed model year means only that an investigation names it; it says nothing about any particular vehicle. Model years with a try.vin recall page link to that page's NHTSA investigations section.
Hyundai
Hyundai Sonata
What an NHTSA investigation is
NHTSA's Office of Defects Investigation (ODI) looks into possible safety defects in vehicles and equipment, often after owner complaints. An investigation usually starts as a Preliminary Evaluation, or as a Recall Query when it concerns whether an existing recall covers the right vehicles or fixes the problem, and ODI can upgrade it to a more detailed Engineering Analysis. A Defect Petition asks NHTSA to open an investigation, and Audit and Equipment Queries are administrative investigations into whether companies complied with federal vehicle safety requirements, such as reporting, recall and certification rules.
An open investigation is not a finding that a safety defect exists, and NHTSA can close one without a recall.
To see whether a specific vehicle has an open recall, enter its VIN at nhtsa.gov/recalls.
Hyundai VIN check: decode a VIN to see its year, make and model.
Sources
NHTSA's investigation record for PE16-010
Investigation details come from NHTSA's investigations file, which try.vin imports once a day. The investigation types are described from the U.S. Department of Transportation Inspector General's May 2023 report on NHTSA's Office of Defects Investigation, NHTSA's petition rules (49 CFR Parts 552 and 557) and NHTSA's Office of Defects Investigation procedures. How try.vin reads NHTSA investigations.