NHTSA Office of Defects Investigation
Engineering Analysis EA04-019: WHEEL SEPARATIONS
- Closed
NHTSA's Office of Defects Investigation opened Engineering Analysis EA04-019 on July 2, 2004 and closed it on May 19, 2005. NHTSA's investigations file lists 3 Jayco models for it and links recall 04V-364 to it.
Updated daily from NHTSA's investigations file
Key facts
- NHTSA number
- EA04-019 (also written EA04019)
- Investigation type
- Engineering Analysis A more detailed stage of a defect investigation, opened when NHTSA's Office of Defects Investigation decides an issue merits further review, often after a Preliminary Evaluation or a Recall Query; it can include vehicle testing, surveys and further information requests.
- Status
- Closed May 19, 2005
- Opened
- Closed
- Vehicle or equipment manufacturer
- Jayco, Inc.
- Components
- Wheels; Wheels — Lugs/Nuts/Bolts/Studs
- Recall linked by NHTSA
- 04V-364: JAYCO/ALUMINUM WHEELS, reported
- Vehicles and equipment
- 3 Jayco models, including the Legacy and Designer
NHTSA's summary
As NHTSA's Office of Defects Investigation wrote it for Engineering Analysis EA04-019.
JAYCO IS CONDUCTING CAMPAIGN 04V-364 TO ADDRESS 742 VEHICLES EQUIPPED WITH SIX LUG ALUMINUM WHEELS.ODI IS INITIATING A RECALL QUERY TO FURTHER INVESTIGATE VEHICLES EQUIPPED WITH EIGHT LUG ALUMINUM WHEELS SINCE THESE VEHICLES EXHIBIT A SMALL BUT PERSISTENT RATE OF WHEEL SEPARATIONS.
Vehicles and equipment listed for this investigation
NHTSA's investigations file lists these vehicles and equipment for Engineering Analysis EA04-019. A listed model year means only that an investigation names it; it says nothing about any particular vehicle. Model years with a try.vin recall page link to that page's NHTSA investigations section.
What an NHTSA investigation is
NHTSA's Office of Defects Investigation (ODI) looks into possible safety defects in vehicles and equipment, often after owner complaints. An investigation usually starts as a Preliminary Evaluation, or as a Recall Query when it concerns whether an existing recall covers the right vehicles or fixes the problem, and ODI can upgrade it to a more detailed Engineering Analysis. A Defect Petition asks NHTSA to open an investigation, and Audit and Equipment Queries are administrative investigations into whether companies complied with federal vehicle safety requirements, such as reporting, recall and certification rules.
An open investigation is not a finding that a safety defect exists, and NHTSA can close one without a recall.
To see whether a specific vehicle has an open recall, enter its VIN at nhtsa.gov/recalls.
Free VIN check: decode a VIN to see its year, make and model.
Sources
NHTSA's investigation record for EA04-019
Investigation details come from NHTSA's investigations file, which try.vin imports once a day. The investigation types are described from the U.S. Department of Transportation Inspector General's May 2023 report on NHTSA's Office of Defects Investigation, NHTSA's petition rules (49 CFR Parts 552 and 557) and NHTSA's Office of Defects Investigation procedures. How try.vin reads NHTSA investigations.