NHTSA vehicle safety data

2018 Fccc redundant S2G Recalls, Ratings & Complaints

The 2018 Fccc redundant S2G has 4 NHTSA recall campaigns and 0 owner complaints on file as of October 16, 2026. Recall repairs are usually free at an authorized Fccc dealer.

NHTSA recall and complaint data for the 2018 Fccc redundant S2G. Recall data is refreshed daily from NHTSA.

TIRES:VALVE

NHTSA #21V921000

Reported November 23, 2021 · Daimler Trucks North America, LLC

Potentially affected: 16,676 vehicles

Defect description

Daimler Trucks North America, LLC (DTNA) is recalling certain 2017-2019 Freightliner Custom Chass XCL, 2017-2022 XCM, XCS, 2017-2023 MC, XCR, 2018-2019 XBR, 2018-2020 XBS, 2018-2022 MBC, MT55, S2C, S2G, S2RV vehicles. The tire valve stem extension for the inner wheel may come into contact with the outer wheel rim opening and become damaged.

Safety consequence

Damage to the valve stem extension may result in a loss of tire pressure of the inner wheel, increasing the risk of a crash.

Manufacturer remedy

Dealers will remove the inner valve stem extensions and stabilizers, free of charge. Owner notification letters were mailed January 18, 2022. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL912. Note: This recall supersedes and expands recall 20V-529 (FL-861). Vehicles previously repaired under 20V-529 will need to have the new remedy completed under this recall.

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

STEERING

NHTSA #18V913000

Reported December 19, 2018 · Daimler Trucks North America LLC

Potentially affected: 501 vehicles

Defect description

Daimler Trucks North America LLC (DTNA) is recalling certain 2017-2019 Freightliner 114SD, 122SD, 108SD, Cascadia and Business class M2 trucks, Freightliner Custom Chassis XBS, XCL, XCM, MT45, MT55, S2G, S2RV, XCR and XCS custom chassis and Western Star 4700, 4900 and 5700 trucks equipped with Detroit Axle axles. The affected vehicles may have loose steering and tie rod arm bolts.

Safety consequence

Loose tie rod arm bolts may lead to separation of the tie rod arm, resulting in a loss of vehicle control, increasing the risk of a crash.

Manufacturer remedy

DTNA has notified owners, and dealers will inspect the steering arm and tie rod arm bolts for to make sure that they are properly tightened, installing new fasteners as necessary, free of charge. The recall began February 9, 2019. Owners may contact Daimler Trucks at 1-800-547-0712. DTNA's number for this recall is FL-802.

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

SERVICE BRAKES, AIR:DISC:CALIPER

NHTSA #18V703000

Reported October 5, 2018 · Daimler Trucks North America LLC

Potentially affected: 5,534 vehicles

Defect description

Daimler Trucks North America, LLC (DTNA) is recalling certain 2018-2019 Freightliner 108SD, 114SD, Cascadia, Business Class M2, Freightliner Custom Chassis Corporation S2C 106 Cab, S2G Cab Chassis, XCL, XCM, XBS, XCP, XCR, Western Star 4700, 4900 and 5700 trucks. The brake caliper mounting bolts may have been insufficiently tightened.

Safety consequence

Loose brake caliper mounting bolts can reduce brake effectiveness, increasing the risk of a crash.

Manufacturer remedy

DTNA will notify owners, and dealers will check and tighten the brake caliper mounting bolts, free of charge. The recall began December 3, 2018. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-794.

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DISC:CALIPER

NHTSA #18V353000

Reported May 29, 2018 · Daimler Trucks North America LLC

Potentially affected: 8,741 vehicles

Defect description

Daimler Trucks North America LLC (DTNA) is recalling certain 2017-2019 Freightliner M2 Business Class, 108SD, 114SD and Cascadia trucks, Western Star 4700, 4900, and 5700 trucks, FCCC S2C 106 Cab, S2G Cab, XBR, XBS, XCL, XCM, XCP, XCR, and XCS chassis equipped with air disc brakes. The brake caliper mounting bolts on these vehicles may be insufficiently tightened, allowing the bolts to loosen.

Safety consequence

If the brake caliper mounting bolts loosen, braking performance may be reduced, increasing the risk of a crash.

Manufacturer remedy

DTNA will notify owners, and dealers will inspect the brake caliper mounting bolts and tighten them as necessary, free of charge. DTNA issued owners an interim notification on July 25, 2018. The recall began September 4, 2018. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-772.

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

Other Fccc redundant S2G model years

Check your 2018 Fccc redundant S2G VIN

Not every recall applies to every VIN in a given year. Enter the 17-character VIN from your Fccc redundant S2G at nhtsa.gov/recalls to see whether your specific vehicle has an unrepaired recall.

Check a Fccc VIN