NHTSA campaign 16V445000

Ferrara Recall 16V-445: Pump Strainer could fail due to Weak Soldering

NHTSA recall 16V445000 was reported by Ferrara Fire Apparatus, Inc. on June 16, 2016, with 60 vehicles potentially affected (per NHTSA). NHTSA's record lists the Ferrara Cinder, Ferrara Igniter, Ferrara Inferno and more for model years 2015–2016. Owners were notified on July 20, 2016, per NHTSA.

Updated daily from NHTSA's recall files

Is my vehicle included?

This page lists, by model year, the vehicles NHTSA's recall record names for campaign 16V445000 in the model years try.vin imports (1995 and later); NHTSA's own record can list more. A model year on the list doesn't mean every vehicle of that year is included, and some may already have been repaired.

To see whether a specific vehicle is included and still needs the repair, enter its VIN at nhtsa.gov/recalls.

Free VIN check: decode a VIN to see its year, make and model.

Key facts

NHTSA campaign
16V445000 (also written 16V-445 or 16V445)
Filed by
Ferrara Fire Apparatus, Inc.
Report received
Potentially affected
60 vehicles (per NHTSA)
Component
Equipment
Owners notified

Repair completion: 100% (latest rate the manufacturer reported to NHTSA; dataset updated October 21, 2026)

NHTSA cautions against comparing completion rates across recalls or manufacturers. How try.vin reads them.

Vehicles listed for this recall

NHTSA's recall record lists these vehicles for recall 16V445000. try.vin imports model years 1995 and later, so NHTSA's own list can be longer. Model years with a try.vin recall page link to it. Build dates are NHTSA's range for a model year (per NHTSA); a vehicle built in that range is not necessarily included.

Ferrara

  • Ferrara Cinder

    • 2015, 2016 · Vehicles built August 3, 2015 – April 29, 2016 (per NHTSA)
  • Ferrara Igniter

    • 2015, 2016 · Vehicles built August 3, 2015 – April 29, 2016 (per NHTSA)
  • Ferrara Inferno

    • 2015, 2016 · Vehicles built August 3, 2015 – April 29, 2016 (per NHTSA)
  • Ferrara Intruder

    • 2015, 2016 · Vehicles built August 3, 2015 – April 29, 2016 (per NHTSA)
  • Ferrara Ultra

    • 2015, 2016 · Vehicles built August 3, 2015 – April 29, 2016 (per NHTSA)
All Ferrara recalls

NHTSA's recall notice

As NHTSA's recall record states it for campaign 16V445000.

Defect description

Ferrara Fire Apparatus, Inc. (Ferrara) is recalling certain model year 2015-2016 Inferno, Igniter, Cinder, Ultra, and Intruder vehicles built on Freightliner and International chassis manufactured August 3, 2015, to April 29, 2016, equipped with pumps to provide pressurized water to aid in fighting fires. These pumps have 6" intake strainers that may have been improperly soldered during production and, as a result, the strainers may come apart during use, allowing parts of the strainer and debris to enter the pump, possibly damaging the pump.

Safety consequence

If the strainer and/or debris enters the pump, and the operator is forced to shut down the pump, reducing firefighting effectiveness, there could be an increased risk of injury.

Manufacturer remedy

Ferrara will notify owners, and owners will check the strainer for missing solder at the joints. Any strainers missing solder will be replaced, free of charge. The recall began on July 20, 2016. Owners may contact Ferrara customer service at 1-800-443-9006 or hale customer service at 1-800-533-3569.

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

Sources

Official NHTSA notice for recall 16V445000

Campaign details come from NHTSA's recall files, which try.vin imports once a day. The plain-language subject and the completion rate come from the U.S. Department of Transportation's Recalls Data dataset. How try.vin reads recall data.