NHTSA campaign 02V160008
Xplorer Recall 02V160008: XPLORER/SEAT BELT RETRACTORS
- Recall influenced by NHTSA's Office of Defects Investigation
NHTSA recall 02V160008 was reported by XPLORER MTR HM/FRANK DIV. on November 21, 2002, with 1 vehicle potentially affected (per NHTSA). NHTSA's record lists the Xplorer 230Xlwt for the 1999 model year.
Updated daily from NHTSA's recall files
Is my vehicle included?
This page lists, by model year, the vehicles NHTSA's recall record names for campaign 02V160008 in the model years try.vin imports (1995 and later); NHTSA's own record can list more. A model year on the list doesn't mean every vehicle of that year is included, and some may already have been repaired.
To see whether a specific vehicle is included and still needs the repair, enter its VIN at nhtsa.gov/recalls.
Free VIN check: decode a VIN to see its year, make and model.
Key facts
- NHTSA campaign
- 02V160008
- Filed by
- XPLORER MTR HM/FRANK DIV.
- Report received
- Potentially affected
- 1 vehicle (per NHTSA)
- Component
- Seat Belts — Front — Retractor
Vehicles listed for this recall
NHTSA's recall record lists these vehicles for recall 02V160008. try.vin imports model years 1995 and later, so NHTSA's own list can be longer. Model years with a try.vin recall page link to it. Build dates are NHTSA's range for a model year (per NHTSA); a vehicle built in that range is not necessarily included.
Xplorer
Xplorer 230Xlwt
- 1999 · Vehicles built December 1, 1998 – December 31, 1998 (per NHTSA)
NHTSA's recall notice
As NHTSA's recall record states it for campaign 02V160008.
Defect description
ONE MOTOR HOME EQUIPPED WITH PASSENGER SEAT BELTS WITH RETRACTORS, THE COVER HALVES FOR THE RETRACTABLE PORTION OF THE BELT CAN SEPARATE COMPLETELY AND RELEASE THE SEAT BELT CONNECTOR. IF THIS OCCURS, ONE OF THE LOAD BEARING PINS IN THE CONNECTOR COULD SEPARATE FROM THE CONNECTOR AND RENDER THE SEAT BELT UNUSABLE. IN THE EVENT OF A CRASH, THE SEAT OCCUPANT WOULD NOT BE PROPERLY RESTRAINED RESULTING IN AN INJURY. THE SEAT BELT SUPPLIER, AMSAFE, WILL PROVIDE A SNAP ON "OVER-COVER" TO OWNERS TO PREVENT THE SEAT BELT COVER FROM SEPARATING.
Safety consequence
IF THIS OCCURS, ONE OF THE LOAD BEARING PINS IN THE CONNECTOR COULD SEPARATE FROM THE CONNECTOR AND RENDER THE SEAT BELT UNUSABLE. IN THE EVENT OF A CRASH, THE SEAT OCCUPANT WOULD NOT BE PROPERLY RESTRAINED RESULTING IN AN INJURY.
Manufacturer remedy
AMSAFE WILL NOTIFY ITS CUSTOMERS AND PROVIDE A PLASTIC OUTER COVER THAT SNAPS OVER THE EXISTING COVER ON UNITS IN THE FIELD AND WILL REPLACE BROKEN SEAT BELTS FREE OF CHARGE. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT AMSAFE AT 574-266-8330 OR XPLORER AT 810-346-2771.
Notes
ALSO, CUSTOMERS CAN CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S AUTO SAFETY HOTLINE AT 1-888-DASH-2-DOT (1-888-327-4236).
Sources
Official NHTSA notice for recall 02V160008
Campaign details come from NHTSA's recall files, which try.vin imports once a day. The plain-language subject and the completion rate come from the U.S. Department of Transportation's Recalls Data dataset. How try.vin reads recall data.